Miscellaneous parts, mostly brackets

Place to buy and sell FSJ parts.
Forum rules
Please read the sales area rules before posting here. Thanks!
User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Miscellaneous parts, mostly brackets

Postby 44bz » Fri Aug 03, 2018 6:03 pm

I’m pulling a few things off a wrecked j4000. There isn’t a lot that’s usable on it. I grabbed the power booster, bracket, and firewall spacer; steering gear bracket; and bucket seats bracket. I couldn’t get the sliders off the seat bases so I’ll probably just cut them off so they’ll be available as well. I’ll also have one each Jeep spear, v8 360, and custom cab emblems.

Feel free to make offers, I’m not sure how to price it -

Booster and brackets - $20
Steering bracket - $20
Seat brackets - $50
Emblems - $10 each

Does not include shipping but most of it will fit in flare rate boxes. Thanks

ZackImage


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Fri Aug 03, 2018 6:07 pm

Located in Portland, OR ish
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

User avatar
66stepside
Posts: 3018
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: Miscellaneous parts, mostly brackets

Postby 66stepside » Fri Aug 03, 2018 10:07 pm

44bz wrote:Located in Portland, OR ish



I’ll take the custom cab Emblems. Ships to 99206.


Sent from my iPhone using Tapatalk
1966 J3000, 401, T-18, Dana 300
1962 Jeep J-200, 4.0, AW4, DANA 300 Father/Son Project
1954 Willy’s Truck: Stock
1967 Quadcab Thriftside
1968 M715: Stock

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Fri Aug 03, 2018 10:09 pm

66stepside wrote:
44bz wrote:Located in Portland, OR ish



I’ll take the custom cab Emblems. Ships to 99206.


Sent from my iPhone using Tapatalk


Which ones? There’s just one of each - custom cab, 360v8, and the spear.


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

User avatar
66stepside
Posts: 3018
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: Miscellaneous parts, mostly brackets

Postby 66stepside » Fri Aug 03, 2018 10:11 pm

Oh, ok, then I’ll just take the “custom cab” emblem.


Sent from my iPhone using Tapatalk
1966 J3000, 401, T-18, Dana 300
1962 Jeep J-200, 4.0, AW4, DANA 300 Father/Son Project
1954 Willy’s Truck: Stock
1967 Quadcab Thriftside
1968 M715: Stock

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Fri Aug 03, 2018 10:13 pm

66stepside wrote:Oh, ok, then I’ll just take the “custom cab” emblem.


Sent from my iPhone using Tapatalk


Ok, I’ll have it for you this weekend:)


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

User avatar
66stepside
Posts: 3018
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: Miscellaneous parts, mostly brackets

Postby 66stepside » Fri Aug 03, 2018 10:14 pm

44bz wrote:
66stepside wrote:Oh, ok, then I’ll just take the “custom cab” emblem.


Sent from my iPhone using Tapatalk


Ok, I’ll have it for you this weekend:)


Sent from my iPhone using Tapatalk

Very cool- thanks!


Sent from my iPhone using Tapatalk
1966 J3000, 401, T-18, Dana 300
1962 Jeep J-200, 4.0, AW4, DANA 300 Father/Son Project
1954 Willy’s Truck: Stock
1967 Quadcab Thriftside
1968 M715: Stock

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Sat Aug 04, 2018 3:34 pm

I also grabbed a fuel tank strap and the metal fill line if anyone needs those. The emblem mounting studs are fully intact.

Image


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

XSapper
Posts: 81
Joined: Sat Jun 30, 2018 10:25 am
Location: Northeastern, KY

Re: Miscellaneous parts, mostly brackets

Postby XSapper » Sun Aug 05, 2018 7:56 pm

Any chance of getting any door parts?

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Sun Aug 05, 2018 7:59 pm

XSapper wrote:Any chance of getting any door parts?


Maybe, what are you after?


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

XSapper
Posts: 81
Joined: Sat Jun 30, 2018 10:25 am
Location: Northeastern, KY

Re: Miscellaneous parts, mostly brackets

Postby XSapper » Sun Aug 05, 2018 8:20 pm

44bz wrote:
XSapper wrote:Any chance of getting any door parts?


Maybe, what are you after?


Sent from my iPhone using Tapatalk

vent windows for both sides, the inside door latch part that the handle hooks too on the drivers side. window regulators and the metal piece that goes on the bottom of the window glass for driver and passenger doors ( my J20s passenger door window doesn't work and sons J10s drivers side doesn't work) Are the ashtrays the same on those as they are on a 80 model?
Also could use the two piece collar that goes around the steering column where it meets the dash if it is light brown.

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Sun Aug 05, 2018 8:26 pm

I think the doors are complete, passenger side top is crushed because of a rollover. I’ll check this week and get back to you.


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

XSapper
Posts: 81
Joined: Sat Jun 30, 2018 10:25 am
Location: Northeastern, KY

Re: Miscellaneous parts, mostly brackets

Postby XSapper » Mon Aug 06, 2018 1:25 am

44bz wrote:I think the doors are complete, passenger side top is crushed because of a rollover. I’ll check this week and get back to you.


Sent from my iPhone using Tapatalk
If the shipping wasn't horrible the whole drivers door would be nice as the inside of mine has a huge dent at the window opening.

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Mon Aug 06, 2018 6:02 pm

XSapper wrote:
44bz wrote:I think the doors are complete, passenger side top is crushed because of a rollover. I’ll check this week and get back to you.


Sent from my iPhone using Tapatalk
If the shipping wasn't horrible the whole drivers door would be nice as the inside of mine has a huge dent at the window opening.


I should be able to get the internals from both doors and the driver side vent window. I don’t think ash trays are there and there’s no collar for the column.


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

XSapper
Posts: 81
Joined: Sat Jun 30, 2018 10:25 am
Location: Northeastern, KY

Re: Miscellaneous parts, mostly brackets

Postby XSapper » Tue Aug 07, 2018 5:52 pm

44bz wrote:
XSapper wrote:
44bz wrote:I think the doors are complete, passenger side top is crushed because of a rollover. I’ll check this week and get back to you.


Sent from my iPhone using Tapatalk
If the shipping wasn't horrible the whole drivers door would be nice as the inside of mine has a huge dent at the window opening.


I should be able to get the internals from both doors and the driver side vent window. I don’t think ash trays are there and there’s no collar for the column.


Sent from my iPhone using Tapatalk

Sounds good! Thanks!

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Sat Aug 11, 2018 11:14 am

XSapper wrote:Sent from my iPhone using Tapatalk

Sounds good! Thanks![/quote]

The window regulators have some surface rust. Passenger side has a little rust through in the glass channel but doesn’t appear to effect its functionality.

Image
Image




Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

XSapper
Posts: 81
Joined: Sat Jun 30, 2018 10:25 am
Location: Northeastern, KY

Re: Miscellaneous parts, mostly brackets

Postby XSapper » Sat Aug 11, 2018 9:09 pm

44bz wrote:
XSapper wrote:Sent from my iPhone using Tapatalk

Sounds good! Thanks!


The window regulators have some surface rust. Passenger side has a little rust through in the glass channel but doesn’t appear to effect its functionality.

Image
Image




Sent from my iPhone using Tapatalk[/quote]
Nice!

BigCountry57
Posts: 27
Joined: Fri Dec 09, 2016 2:05 pm

Re: Miscellaneous parts, mostly brackets

Postby BigCountry57 » Wed Aug 15, 2018 10:12 am

Still have the booster and brackets? If so how much shipped to 42240?

User avatar
44bz
Posts: 1013
Joined: Fri Jun 08, 2012 6:17 pm
Location: Oregon City, OR

Re: Miscellaneous parts, mostly brackets

Postby 44bz » Fri Aug 17, 2018 11:30 am

BigCountry57 wrote:Still have the booster and brackets? If so how much shipped to 42240?


Sorry, just saw this. I do still have them and will work on getting you a quote. I just noticed somebody notched the bracket to slide the booster over, probably to make room for the motor that was swapped in. I don’t think it effects functionality but I don’t want any surprises.
Image


Sent from my iPhone using Tapatalk
1968 J2000 - AMC 327/T18/D20 (twin stick), stock D44s, 3" body lift, 35x12.50 Goodyear MTRs w/ Kevlar

User avatar
toothofwar
Posts: 230
Joined: Sun Apr 22, 2018 7:38 am

Re: Miscellaneous parts, mostly brackets

Postby toothofwar » Fri Aug 17, 2018 11:38 am

44bz wrote:
XSapper wrote:Sent from my iPhone using Tapatalk

Sounds good! Thanks!


The window regulators have some surface rust. Passenger side has a little rust through in the glass channel but doesn’t appear to effect its functionality.

Image
Image




Sent from my iPhone using Tapatalk[/quote]PM sent on wing windows.

Sent from my SAMSUNG-SM-G891A using Tapatalk


Return to “FSJ Parts Sales”

Who is online

Users browsing this forum: No registered users and 1 guest