Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Well, got some time to work on it. Started putting fuel system together and found the smaller tank i got is wider then what was in there. I have a 4x8 sheet of 1/8", think I'm going to build my own tank.
I got a 3" 90* bent and now the exhaust is done. From my splice back it's all stock.
Sent from my SM-G920V using Tapatalk
You do not have the required permissions to view the files attached to this post.
Last edited by jaber on Sun Sep 03, 2017 2:39 pm, edited 5 times in total.
Stuka wrote:You can make them show up. After adding them, you can copy their location and put that link inside img tags and then we can see them without clicking.
I thought it sounded easy, but I still seem to be screwing up somewhere...
Stuka wrote:You can make them show up. After adding them, you can copy their location and put that link inside img tags and then we can see them without clicking.
I thought it sounded easy, but I still seem to be screwing up somewhere...
You were close. You need to copy the full URL or the image.
Been doing the little things, wiring, gauge panel install (forgot pics) and working on inner fenders to hold engine bay crap. I was showing it off to a guy yesterday talking about wanting to keep the ac. For grins, I grabbed the dodge ac condenser and reinstalled it on the inner cooler and put the front panel back on. To my surprise, I'm only going to have to trim a little more where the lines attach.
uploadfromtaptalk1505662474893.jpg
Sent from my SM-G920V using Tapatalk
You do not have the required permissions to view the files attached to this post.
Been doing little things, wire harness under the dash to see where everything will fit and building custom inner fenders for mounting everything. I am building an air tunnel into the passy side for the air cleaner to draw from. It'll pull from behind the passy headlight. Slow but sure progress.
Ok, got a little more done yesterday. I decided to try to get the dodge air box in to save buying an aftermarket setup, cheap is key here. When building the inner fender "shelf", I added a channel down the passenger side to the front to draw air from.