trying something different

Area for Offroad Modification Tech
Post Reply
User avatar

Topic author
fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

trying something different

Post by fulsizjeep »

I modified the spring hangers a little and found the Jeep gets better flex. What do you think?

Image
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac

bigun
Posts: 1250
Joined: Sat Jun 11, 2011 8:20 pm
Location: Mountainair, NM

Re: trying something different

Post by bigun »

Wow that is some modification how high in the air were you before you landed!
User avatar

Topic author
fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: trying something different

Post by fulsizjeep »

Do washboard county roads count? If yes, about 6". :D
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac

will e
Posts: 5096
Joined: Sat Aug 18, 2012 8:21 am

Re: trying something different

Post by will e »

That's one way to do it!
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

derf
Posts: 1403
Joined: Mon Jun 04, 2012 9:10 am
Location: Littleton, CO
Contact:

Re: trying something different

Post by derf »

My inner Minnesotan is trying to break out here...


Well, I see how ya did that. And I'm not the kind of guy who would tell you that you're wrong or anything. But, ya know, if it were me tryin' that out, I'd probably choose a different way to get that done, eh.
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: trying something different

Post by Stuka »

Sorry, but my OCD is going nuts. You really need to make that symmetric.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

will e
Posts: 5096
Joined: Sat Aug 18, 2012 8:21 am

Re: trying something different

Post by will e »

In Ouray this year my spring hanger had a rivet pop loose. Dusty was riding shotgun, we were on an easy trail. The noise it made was amazing. I looked at Dusty and said something like "That's not normal" or "That's not good". I had a local shop here in AZ fix/weld it.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: trying something different

Post by Locked and Loaded »

Needs more triangulation.
Drink more Water
User avatar

Topic author
fulsizjeep
Moderator
Posts: 5012
Joined: Sun Nov 06, 2011 7:21 am
Location: Fruitville, FL
Contact:

Re: trying something different

Post by fulsizjeep »

I knew I would get valuable feedback. Thanks! :P
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
Post Reply