FastEddie J10 restomod

Area to show off your Custom Build threads.
User avatar
jaber
Vendor
Posts: 2968
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: FastEddie J10 restomod

Postby jaber » Sun Jun 10, 2018 6:25 am

I like that, much better to look at then the digital...
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

User avatar
Stuka
Site Admin
Posts: 8568
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: FastEddie J10 restomod

Postby Stuka » Sun Jun 10, 2018 9:29 am

Oh that’s cool. That looks way better than there old gauge cluster.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jun 10, 2018 10:59 am

tedlovesjeeps71 wrote:What's the back side look like? Are the lights led or bulbs?


Backside is flat with rectangle plug which mostly goes to remote mounted module which is where most sensor inputs are, looks like it was made on a 3D printer
No replaceable bulbs must be LED
Sent from my iPhone using Tapatalk

User avatar
tedlovesjeeps71
Posts: 2432
Joined: Fri Jul 22, 2016 4:39 pm

Re: FastEddie J10 restomod

Postby tedlovesjeeps71 » Sun Jun 10, 2018 11:28 am

sonoraed wrote:
tedlovesjeeps71 wrote:What's the back side look like? Are the lights led or bulbs?


Backside is flat with rectangle plug which mostly goes to remote mounted module which is where most sensor inputs are, looks like it was made on a 3D printer
No replaceable bulbs must be LED
Sent from my iPhone using Tapatalk


That's good to know. Maybe less of a wiring cluster-duck than the factory stuff. Was it very pricey?


Sent from my iPhone using Tapatalk

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jun 10, 2018 1:53 pm

$795.00 plus freight, one other thing the panel has is a gear shift indicator which solves the problem with 4 speed AT upgrades, also there's a GPS add on,external dimmer,no speedo cable, and other stuff not cheap but getting to the point just want to get this truck done

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jul 01, 2018 7:43 am

tedlovesjeeps71 wrote:
sonoraed wrote:
tedlovesjeeps71 wrote:What's the back side look like? Are the lights led or bulbs?


Backside is flat with rectangle plug which mostly goes to remote mounted module which is where most sensor inputs are, looks like it was made on a 3D printer
No replaceable bulbs must be LED
Sent from my iPhone using Tapatalk


That's good to know. Maybe less of a wiring cluster-duck than the factory stuff. Was it very pricey?


Sent from my iPhone using Tapatalk

Image
Sent the wiper arms along with grille and stuff to a chrome shop just got them back really surprised how good they look now need to find wiper blades to match, lost my wiper towers if anybody has a set would be appreciated


Sent from my iPhone using Tapatalk

User avatar
DustinLangston
Posts: 523
Joined: Fri Jun 14, 2013 8:03 pm
Location: Cedar City Utah

Re: FastEddie J10 restomod

Postby DustinLangston » Tue Jul 10, 2018 3:34 pm

I need to see a picture of this rechromed grille!
1982 Wagoneer Limited 5.3L Vortec 4L60E swap - finished/restored - sold - bought back - sold again
1979 Wagoneer 360 TH400 1339 QT - built into perfect daily driver - sold
1981 J10 Sportside Honcho - finished/restored - sold
1979 Cherokee Golden Eagle - 5.3L Vortec 6L80E swap - finished/restored - sold
1967 Super Wagoneer - sold, too much work
1978 J10 Golden Eagle - finished/restored - sold
1962 Rambler Classic Cross Country Wagon - current project, wife's daily driver - she'll never let me sell it

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jul 15, 2018 4:29 pm

DustinLangston wrote:I need to see a picture of this rechromed grille!


about to put it all together, one step closer! yeah, will post pictures soon

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sat Jul 21, 2018 6:31 pm

sonoraed wrote:
DustinLangston wrote:I need to see a picture of this rechromed grille!


about to put it all together, one step closer! yeah, will post pictures soon

Image
A little bling



Sent from my iPhone using Tapatalk

User avatar
Stuka
Site Admin
Posts: 8568
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: FastEddie J10 restomod

Postby Stuka » Sat Jul 21, 2018 9:37 pm

Perdy!
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jul 22, 2018 12:06 pm

Stuka wrote:Perdy!

Image
Found a bucket seat that might work



Sent from my iPhone using Tapatalk

User avatar
Stuka
Site Admin
Posts: 8568
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: FastEddie J10 restomod

Postby Stuka » Sun Jul 22, 2018 3:58 pm

May not work for long trips, but should help with weight reduction :)
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
jpswapmohn
Posts: 400
Joined: Sun Mar 02, 2014 6:08 pm
Location: VA/PA

Re: FastEddie J10 restomod

Postby jpswapmohn » Sun Jul 22, 2018 7:53 pm

I wanta see that dash and the a/c vents you worked into the bottom of it.. 8^)
One day I will wake up and realize that my jeep is complete...one day, I just know it.
88Wag, LT1/4L60E/NP242, etc.
95YJ, STaK, D44's, SOA, ARB's, Bilstein 5150s, 35" KM2's
50 CJ3A
77 J-10 (sold)

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jul 29, 2018 8:17 am

Really like LED tail/ stop light / lens from BJ’s kind of starburst patternImageImage


Sent from my iPhone using Tapatalk

User avatar
sonoraed
Vendor
Posts: 318
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: FastEddie J10 restomod

Postby sonoraed » Sun Jul 29, 2018 8:21 am

Image
Next, powerboards my wife didn’t like the milk crate!, made for a 2007 or so wrangler length is just right


Sent from my iPhone using Tapatalk


Return to “FSJ Build Threads”

Who is online

Users browsing this forum: No registered users and 7 guests