The Pheobe Too

Area to show off your Custom Build threads.
User avatar
Stuka
Site Admin
Posts: 7902
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: The Pheobe Too

Postby Stuka » Fri Mar 23, 2012 5:04 pm

jsinajeep wrote:I hope that know one get pictures of the guy that drove that reck out of the desert. :lol:


Actually I think there is video of that :P
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Stock, but not for long!
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Sat Mar 24, 2012 7:38 am

Yes Jerry we have proof YOU drove her up and out ,and did a fine job of it.Considering running out of gas,when she had a full tank.old doors that just didn't latch any more. ;)
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Sat Mar 24, 2012 7:53 am

The dash is done,a/c is left to install but need to get some help with that no biggy.
Image
From this to this.
Image
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Sat Mar 24, 2012 8:00 am

Did some work on the valence had the standard upwards dent under the front marker even though it would be hidden by the bumper it had to go.
Image
Image
We also got alittle rain here yesterday. Purple Rain that is.
Image
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
jaber
Vendor
Posts: 2859
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: The Pheobe Too

Postby jaber » Sat Mar 24, 2012 8:08 am

I have to admit, I like that purple.

My dads CJ5 will get painted my version of the original "Plum" it came with. \:D/
Heck, even my old High School colors were Purple and Gold. 8-}
Jeff

'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 p/u
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

bigun
Posts: 849
Joined: Sat Jun 11, 2011 8:20 pm
Location: Mountainair, NM

Re: The Pheobe Too

Postby bigun » Sat Mar 24, 2012 4:52 pm

Is Pheobe Too getting stock bumpers or custom? Krista BB was asking me yesterday with the gleam in his eye!

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Sat Mar 24, 2012 5:46 pm

Jeff have to agree on the purple it's growing on me.

Bigun at this moment To my knowledge we are going with the stock bumpers,But there is steel just laying around to build some!
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Sat Mar 24, 2012 5:49 pm

Another little mod done to P2 is the front grill wings added.
Image

Thanks Jerry the templets worked great.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
jsinajeep
Posts: 1674
Joined: Tue Aug 23, 2011 8:25 pm
Location: Globe AZ.

Re: The Pheobe Too

Postby jsinajeep » Sat Mar 24, 2012 8:04 pm

Dam, they look nice . I would like for you to work on my Jeep next but don't make me roll it first :))

User avatar
jeepstress
Posts: 73
Joined: Fri Mar 09, 2012 1:20 pm

Re: The Pheobe Too

Postby jeepstress » Sun Mar 25, 2012 11:57 am

Just awesome! I am tickled to death with how she's coming out! Had a nice talk with Bob this morning and I have confirmed that she's keeping her chrome three piece bumpers!
The High Priestess of Eternal Combustion
Phoebe - 77 401 Wag ~ Luna - 76 SOA 401 Wag ~ Artemis - 77 401 J20

"The worst thing about rolling my jeep was licking the paper."

bigun
Posts: 849
Joined: Sat Jun 11, 2011 8:20 pm
Location: Mountainair, NM

Re: The Pheobe Too

Postby bigun » Sun Mar 25, 2012 3:27 pm

jeepstress wrote:Just awesome! I am tickled to death with how she's coming out! Had a nice talk with Bob this morning and I have confirmed that she's keeping her chrome three piece bumpers!

I think Craig was going to offer a pair of his BlackBart Zombie mashers, they only add about 200 Lbs to the vehicles weight!

User avatar
fulsizjeep
Moderator
Posts: 3757
Joined: Sun Nov 06, 2011 7:21 am
Location: Mancos Valley, CO
Contact:

Re: The Pheobe Too

Postby fulsizjeep » Mon Mar 26, 2012 2:33 am

Wings! WooT! :-bd
Sent from my IBM 5150 using TN5250 emulator.

Flint Boardman
Embracing the Borg Warner QuadraTrac since 1980 http://www.jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s and a few Evil Twin mods, http://eviltwinfab.com
76 401 Wag, 77 401 Wag, 77 401 J20

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Mon Mar 26, 2012 10:47 am

Alittle look at what's to come.Nothing but glass on the bar just got to wait to get it out in the sun.
Image
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
jeepstress
Posts: 73
Joined: Fri Mar 09, 2012 1:20 pm

Re: The Pheobe Too

Postby jeepstress » Mon Mar 26, 2012 11:18 am

That purple is PERFECT! I'm in love!!!!! :x :x :x :x :x
The High Priestess of Eternal Combustion
Phoebe - 77 401 Wag ~ Luna - 76 SOA 401 Wag ~ Artemis - 77 401 J20

"The worst thing about rolling my jeep was licking the paper."

User avatar
fulsizjeep
Moderator
Posts: 3757
Joined: Sun Nov 06, 2011 7:21 am
Location: Mancos Valley, CO
Contact:

Re: The Pheobe Too

Postby fulsizjeep » Tue Mar 27, 2012 8:32 am

I love that SHE is in Love with it Bob. Your work is so appreciated! :-bd
Sent from my IBM 5150 using TN5250 emulator.

Flint Boardman
Embracing the Borg Warner QuadraTrac since 1980 http://www.jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s and a few Evil Twin mods, http://eviltwinfab.com
76 401 Wag, 77 401 Wag, 77 401 J20

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Tue Mar 27, 2012 8:55 am

Got to do alittle work with this tool today,can anyone guess what it is?
Image
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
lindel
Moderator
Posts: 915
Joined: Tue Oct 04, 2011 2:47 pm
Location: Irving, TX

Re: The Pheobe Too

Postby lindel » Tue Mar 27, 2012 12:59 pm

Sure, it's a "fin comb" for straightening the fins on AC condensers/evaporators. Very useful if you like shredded knuckles...
Lindel

His: 1999 TJ - 4.0L/AX-15/NV231 - with lots of mods...

Hers: 1987 GW - Shiny, new 360/727/NP229 - 31" Falken Rocky Mountain ATs and rust.

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Wed Mar 28, 2012 6:22 am

Yep wanted to straighten out the a/c fins.
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
rstep
Moderator
Posts: 1111
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: The Pheobe Too

Postby rstep » Wed Mar 28, 2012 7:48 am

Just tring some idea's out what do you guy's think?
Image

401 in black inbedded in the paint stripe
1977 Cherokee
401 ,turbo 400 P/T,Rear detriot
Tad Rack
Custom Interior
Front and rear bumpers custom
Black spokes 33's MT's

Stuff I Make.
viewtopic.php?f=34&t=5620

User avatar
jeepstress
Posts: 73
Joined: Fri Mar 09, 2012 1:20 pm

Re: The Pheobe Too

Postby jeepstress » Wed Mar 28, 2012 9:10 am

Oops! I wish you had mentioned where you were thinking about doing that Bob! We have the Jeep dart badges that are supposed to go there. She's supposed to get both the front and back badges of this vintage (altho the back Wagoneer badge will be centered in the stripe instead of on the bottom). It's a damn nifty idea though! I still want to go with the red 401 badges on the hood.

Image
The High Priestess of Eternal Combustion
Phoebe - 77 401 Wag ~ Luna - 76 SOA 401 Wag ~ Artemis - 77 401 J20

"The worst thing about rolling my jeep was licking the paper."


Return to “FSJ Build Threads”

Who is online

Users browsing this forum: No registered users and 4 guests