Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Area to show off your Custom Build threads.
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Wed Jun 08, 2016 10:45 pm
Just picked up this 83 Wagoneer for $100! Lifted (not sure how much) on 32s. Runs and drives but it has a cracked engine block. I have a guy selling me a running 360 for $250 for me to put in next week! More pics as coming as I get stuff done!
Sent from my SM-G900V using Tapatalk
Tatsadasayago
Posts: 3684 Joined: Thu Aug 28, 2014 2:22 pm
Location: Sacramento, CA
Post
by Tatsadasayago » Wed Jun 08, 2016 11:40 pm
Looks to be about a 4" lift.
Nice find!
Did you pay extra for the fungus?
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Thu Jun 09, 2016 1:11 am
Tatsadasayago wrote: Looks to be about a 4" lift.
Nice find!
Did you pay extra for the fungus?
Haha nope, that's Washington for you though!
Sent from my SM-G900V using Tapatalk
Tatsadasayago
Posts: 3684 Joined: Thu Aug 28, 2014 2:22 pm
Location: Sacramento, CA
Post
by Tatsadasayago » Thu Jun 09, 2016 5:46 am
Us old timers refer to the fungus as 'Patina'.
I wish you well Sir.
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Thu Jun 09, 2016 6:12 am
Oh man my noob is showing! Thanks man!
Sent from my SM-G900V using Tapatalk
rocklaurence
Vendor
Posts: 2569 Joined: Sat Mar 30, 2013 6:53 am
Post
by rocklaurence » Fri Jun 10, 2016 4:57 am
I hear an Extraction Story building..
How hard was it to retrieve? I always Bug Bomb during the extraction and again before I start working on it.
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Fri Jun 10, 2016 4:10 pm
It actually hasn't been too bad this far. It had been completely run out of gas so getting it to start took a bit. A few backfires, one guys shirt got completely burnt. We used a funnel and a line to put gas directly into the carb because the fuel pump wasn't working. I had to run along side the car pouring gas in a funnel while we drove it over
Sent from my SM-G900V using Tapatalk
Nikkormat
Posts: 3623 Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City
Post
by Nikkormat » Fri Jun 10, 2016 4:50 pm
Hey, that looks pretty good.
Gabe, "reformed" Jeep hoarder.
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Fri Jun 10, 2016 7:41 pm
Thanks man! I have big plans for it.
Sent from my SM-G900V using Tapatalk
Dusty
Posts: 486 Joined: Wed Apr 18, 2012 11:41 pm
Post
by Dusty » Fri Jun 10, 2016 8:16 pm
Would love to see a proper Overlander done on an FSJ platform.!
If God is your co-pilot, you need to switch seats!
Nikkormat
Posts: 3623 Joined: Sun Jun 29, 2014 11:45 pm
Location: Salt Lake City
Post
by Nikkormat » Fri Jun 10, 2016 8:20 pm
Proper! My folding chairs and green cooler don't qualify me as proper?
I do pretty good for a poser, who else had done a two week 3000 mile trip in their FSJ?
Gabe, "reformed" Jeep hoarder.
Dusty
Posts: 486 Joined: Wed Apr 18, 2012 11:41 pm
Post
by Dusty » Fri Jun 10, 2016 9:58 pm
Nikkormat wrote: Proper! My folding chairs and green cooler don't qualify me as proper?
I do pretty good for a poser, who else had done a two week 3000 mile trip in their FSJ?
Go look on expeditionportal.com for a proper Overlander rig.
If God is your co-pilot, you need to switch seats!
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Fri Jun 10, 2016 11:52 pm
I guess I wish I hadn't said overland. It will be more like a PNW specific exploring vehicle. I am taking a lot of ideas from proper over landers and putting them in a bigger wheeling platform.
Sent from my SM-G900V using Tapatalk
SJTD
Posts: 1932 Joined: Tue May 21, 2013 12:02 pm
Location: Lompoc, Sunland or somewhere between
Post
by SJTD » Sat Jun 11, 2016 8:13 am
Me too.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Sun Jun 12, 2016 10:26 pm
Found out today that it was just 2 freeze plugs! Still $100 bucks and it runs and drives
Sent from my SM-G900V using Tapatalk
Topic author
aaron6484
Posts: 9 Joined: Wed Jun 08, 2016 11:32 am
Post
by aaron6484 » Tue Jun 14, 2016 6:19 pm
After an hour with the pressure washer the outside doesn't look so bad! The inside however... Well I didn't take any pictures yet for a reason.
Sent from my SM-G900V using Tapatalk
Cheapthrills
Posts: 632 Joined: Wed Nov 02, 2016 7:09 am
Location: Sedalia colorado
Post
by Cheapthrills » Sun Dec 04, 2016 9:42 pm
Cool rig can't wait to see what you do with it