ICM issues, need help

Modified FSJ Tech Area
User avatar

Topic author
Mass ownage
Posts: 27
Joined: Tue Jun 26, 2012 8:10 pm

Re: ICM issues, need help

Post by Mass ownage »

So I'm thinking a got a bad batch of reman distributors. My jeep died again this weekend. Killed the icm and coil. Upon investigating I found the pick-up in the month old distributor was lose and the gear inside was rubbing it. I ordered a HEI setup.
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: ICM issues, need help

Post by Stuka »

Thats one way to solve your issue. If everything fails, just get rid of them!

Which HEI did you go with?
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

Topic author
Mass ownage
Posts: 27
Joined: Tue Jun 26, 2012 8:10 pm

Re: ICM issues, need help

Post by Mass ownage »

Ordered one from Procomp Electronics.
User avatar

Topic author
Mass ownage
Posts: 27
Joined: Tue Jun 26, 2012 8:10 pm

Re: ICM issues, need help

Post by Mass ownage »

The new distributor did the trick.
User avatar

Stuka
Site Admin
Posts: 11789
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: ICM issues, need help

Post by Stuka »

Good to hear :)
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Post Reply