Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
On may 77 cherokee was able to fab up some longer c-bar that contects the front cable (mount to each side)to the rear hard cable.
Used a piece of 3/16 flat bar 16" x 1.250.Drilled some holes abit bigger then the swedges on the cable,then notched a slot for the cable and slid in.They have been on for 3 years with no issue.Beats replacing cable.
But if I understand what you did, it doesn't do anything for the hard mount where the sleeved cable sheath mounts to the frame? I had to relocate the brkts on mine to put enuf slack in the cable. Am I missing something here? ?
Correct,I had enough slack in the back.I did loosen everything up and let the rear axle go to full drop so it may have pulled the cable back some before I put the c-bracket in.