Page 1 of 1

Front Sway bar end links

Posted: Thu Jul 26, 2018 7:51 am
by mattywilz
This is for a 1985 wagoneer. Pulled off the old sway bar end links to install new extended ones for a 4 inch lift. Old ones has no metal sleeve inside the bushing, the new ones came with a metal sleeve in the bushing that seems like it won’t fit around the upper or lower studs. Do I have to use these metal sleeves or can I just toss them? It seems like they fit pretty snug without the sleeve.

Re: Front Sway bar end links

Posted: Thu Jul 26, 2018 8:47 am
by Stuka
Just remove them. The sleeve is for when you have bolts instead of studs. The studs should be snug enough to get rid of any major play.

Re: Front Sway bar end links

Posted: Thu Jul 26, 2018 9:34 am
by mattywilz
Makes sense, I thought I may have had to press them in.