Motorcraft 2100 fix/rebuild help

Modified FSJ Tech Area
Post Reply

Topic author
Billybob535
Posts: 45
Joined: Mon Dec 25, 2017 5:44 am

Motorcraft 2100 fix/rebuild help

Post by Billybob535 »

Any Motorcraft 2100 gurus in here? My 83 Cherokee 258 has a 2100 swapped on it. Its a 1.14 version from a 68 Ford 289 (as per the C7AF-AS tag). I am going to rebuild it but I need to fix the accelerator pump rod as mine has a plastic end that appears broken. I found a rebuild kit, replacement rod, and replacement clip from quadrajetparts.com for under $50 shipped.

Anyone here used one of their 2100 kits (https://quadrajetparts.com/ford-2100-ca ... -1274.html)?

Will the all metal rod (https://quadrajetparts.com/linkage-ford-p-1447.html) and clip (https://quadrajetparts.com/ford-pump-cl ... -2350.html) replace the factory one with the threaded end?

Anything else to know? I just need this to start and run good enough to get through 1 inspection (no emissions). After that the engine and tranny are coming out for a swap. Thanks
top.jpg
front.jpg
tags.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply