Swap a 246 for a 241

Modified FSJ Tech Area
Post Reply

Topic author
81waggy
Posts: 111
Joined: Wed Mar 09, 2016 7:30 am

Swap a 246 for a 241

Post by 81waggy »

Hi all.

I have a vortec 350/4l60e/np 246 installed in my 81 wagoneer. Everything works great except that I don't like the 246. I have manual locking hubs, but with the front drive shaft constantly turning and almost never using the 4wd, (sorry, daily driver) I want to swap in a 241 so that I can lessen the wear and tear on the front axle.

As far as I can tell, I think if you've swapped in a modern GM drivetrain, it most likely came with a push button 4x4 control.

My search for information has led me to this: I understand the mechanical needs, however, I don't understand the computer needs/connections. Can you eliminate the controller for the transfer case or do you still need it? Other than the speed sender, can the wiring be simplifid or is it all still necessary?
81 Wagoneer with a TBI 350 Vortec.
83 Wagoneer - 360 Quadratrac
69 Wagoneer - 350 Diesel trail rig
70 Wagoneer - 1414x
Post Reply