360 pulley and damper interchange

Modified FSJ Tech Area
Post Reply

Topic author
johneyboy03
Posts: 1
Joined: Fri Feb 02, 2018 11:13 am

360 pulley and damper interchange

Post by johneyboy03 »

Hi guy's i've been suggested by a member to ask my specific question here.

I got a rebuit amc 360 that has a three bolt damper and 2 row pulley in my jeep. I have a jeeper friend that can sales me triple row pulley taken from a 1989 360 amc. It has a 4 bolt damper and pulley.

My question is is there any problem using the 4 bolt damper and pulley on my amc 360.

My friend is selling me the triple row water pump pulley, the two row ps pump pulley and the 2 row alternator pulley.
I will use all of them because i need to use the two belt set-up for my cs144 alternator that i swapped last year.
User avatar

HeavyMetalThunder_81
Posts: 740
Joined: Sat Mar 17, 2012 5:01 pm
Location: Haze Gray

Re: 360 pulley and damper interchange

Post by HeavyMetalThunder_81 »

Shouldn't be a problem.
-Jonny B.
1979 Cherokee Golden Eagle - UNDER CONSTRUCTION
7" lift, 35x12.5x15
AMC 401 - Pro-FLo 4 FI
NV4500/NWFBB/NP205 - Triple Stick'd
F D44 - 4.10, Eaton E-Locker
R M23 - 4.10, Detroit Locker

1979 Cherokee Chief - Parts
1979 Cherokee Chief - Parts
1979 Wagoneer - Sold
1981 Cherokee Chief - Cubed

Tanker
Posts: 59
Joined: Sat Mar 23, 2013 6:42 pm
Location: NC Mountians

Re: 360 pulley and damper interchange

Post by Tanker »

No problem just check the timing on it. Put it on and see if timing is right. I have a "good" one by looks but the mark is 20 degrees off.
Jakes Full Size Jeep Junkyard
Hire the handicap there fun to watch. IR1
Post Reply