dodgerammit wrote:az chip wrote:I was thinking of pics of the install. Did you do it? Or mechanic?
I did it
No pics of the install, but it looks very close to babywag's job. I ended up using the Ford low pressure deal and it mounted just fine to the existing 5/16" pick up tube.
IMG_1422.JPG
I only straightened the tube
measured depth of tank
allowed for a bit of wiggle room with the pump
trimmed the tube with a tubing cutter
and attached pump to bottom.
I drilled a 3/8" hole in the top of the assembly beside the actual sending unit electronics and inserted a rubber grommet, then fed 2 12ga wires through for the pump.
You do not have the required permissions to view the files attached to this post.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior)
AMC 360 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses
Ongoing thread-
viewtopic.php?t=11897
92 Wrangler Islander 4.0/32RH/231 D30/D35 RHD