tfi parts

[lil jeep mec]

I'm trying to make a list of TFI parts here is what i have so far

wires
http://www.jegs.com/i/JEGS-Performance- ... Id=1064786
http://www.jegs.com/i/JEGS-Performance- ... Id=1064786

cap/rotor
http://www.jegs.com/i/Ford-Racing/397/M ... 2/10002/-1
is this the right one? i want to use the ford style cap

coil
-i have a Jacobs high output coil i'm going to use

[Stuka]

That cap and rotor should work for you. Make sure the wires are meant for that style cap, as the connections are opposite of a stock cap.

I think I ended up using wires for a Buick 350 w/HEI (Although I actually had an HEI, but its the same style cap connectors). Ford 460 wires should also work.

[AwesomeJ10]

Here is my list;

[lil jeep mec]

The wires are for a 460, the lengths should just about be the same right? The dist is in almost the same location right?

I want the ford cap because it seems more common then the msd one (for replacements)

[Stuka]

The 460's distributer is a bit more centered, but the block is physically larger. So they should work fine.

[lil jeep mec]

i was just thinking will it clear the power steering pump?

[sgtpoliteness]

Something I can add! I have the TFI coil "conversion" and the bigger cap on my rig. I did a tune up a couple months ago and bought the 460 wires and a couple are a little tight. They certainly fit, but it's not ideal. I may goof with the routing some more to get it better.