Wheels and Lift question!

Stock FSJ Tech Area
hanger
Posts: 37
Joined: Sun Dec 16, 2018 8:09 am

Re: Wheels and Lift question!

Postby hanger » Mon Apr 29, 2019 4:28 pm

https://share.icloud.com/photos/0x7ulgT ... nOY0SFs6zg


The truck on the left is a stock 07 Chevy 4X4 for comparison.

MReno
Posts: 32
Joined: Sun Mar 03, 2019 6:39 pm

Re: Wheels and Lift question!

Postby MReno » Tue Apr 30, 2019 5:21 am

Thanks RamJetFSJ.

User avatar
fulsizjeep
Moderator
Posts: 4382
Joined: Sun Nov 06, 2011 7:21 am
Location: Mancos Valley, CO
Contact:

Re: Wheels and Lift question!

Postby fulsizjeep » Wed May 01, 2019 5:15 am

RamJetFSJ wrote:Rule of thumb with narrow tracks is 31s with 4" lift, and 33s with 6" lift (no trimming).

33x10.5x15 will clear on 6" spring lift, not 12.5 wide.
Sent from my IBM 5150 using TN5250 emulation.

Flint Boardman ~ http://jubileejeeps.org
Embracing the Borg Warner QuadraTrac since 1980 http://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s, a few Evil Twin mods, http://eviltwinfab.com and a few TT's Fabworks mods, http://www.ttsfabworks.com
76 401 Wag, 77 401 Wag, 77 401 J20

MReno
Posts: 32
Joined: Sun Mar 03, 2019 6:39 pm

Re: Wheels and Lift question!

Postby MReno » Tue May 07, 2019 10:16 am

I am really wondering how a 6" lift would look with 31x10.5 tires? I will not be using the vehicle for serious or even moderate off-road, but rather just a cool day or two a week use; but certainly don't want the GW to look disproportionate like guys with 12" lifts and 225 tires!

RamJetFSJ
Posts: 315
Joined: Fri Mar 22, 2013 12:36 pm
Location: Carpinteria, CA

Re: Wheels and Lift question!

Postby RamJetFSJ » Tue May 07, 2019 4:51 pm

Personally, I wouldn’t do it. Wouldn’t look right.
80 Wag in 73 attire, Ram Jet 350 power

hanger
Posts: 37
Joined: Sun Dec 16, 2018 8:09 am

Re: Wheels and Lift question!

Postby hanger » Wed May 08, 2019 9:55 am

The 4” skyjacker made an enormous difference from stock height. Unless you’re trying to make up for something 4” is plenty.

User avatar
ProTouring442
Posts: 609
Joined: Sat Mar 23, 2013 10:28 am
Location: Harriman, Tennessee
Contact:

Re: Wheels and Lift question!

Postby ProTouring442 » Sun May 12, 2019 12:09 pm


MReno
Posts: 32
Joined: Sun Mar 03, 2019 6:39 pm

Re: Wheels and Lift question!

Postby MReno » Tue May 14, 2019 10:17 am

Thanks everyone. I will stick with 4" or less.


Return to “Stock FSJ Tech”

Who is online

Users browsing this forum: No registered users and 1 guest