Thanks!

Stock FSJ Tech Area
Post Reply

Topic author
Rance
Posts: 4
Joined: Sun Dec 16, 2018 2:41 pm

Thanks!

Post by Rance »

Hey guys,
I"m new to this board and only posted a couple of times, both having to do with a J10--258 and its BBD carb. Many thanks to all who responded with helpful suggestions and assistance in rebuilding the carb. And special thanks to "1979BettyWhite" who sent me a manual and numerous direct emails to help me troubleshoot the problems. Turned out though it wasn't the carb--I discovered the timing was about 10 degrees after dead center. Retiming it to 8 degrees BTDC made this thing run like a real champ!

Again, many thanks to all!

Happy Holidays,
Rance
1980 J10, '63 Willys Wagon, '56 Powell, '26 T, ''50 Plymouth, and lots of other old heavy rusty stuff that leaks oil...
User avatar

Stuka
Site Admin
Posts: 11806
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Thanks!

Post by Stuka »

Glad you got it running well :)
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
User avatar

az chip
Posts: 1433
Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ

Re: Thanks!

Post by az chip »

Yay! And good on members for helping.
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.

will e
Posts: 5104
Joined: Sat Aug 18, 2012 8:21 am

Re: Thanks!

Post by will e »

Yeah, a good group of folks. I am glad you got it working.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Post Reply