I was wondering if anyone knew if all the body mounts on a 69 J3000 are the same thickness. The original mounts on my truck were completely shot, some were missing and some were just strips of rubber. This last weekend I built some Polly spacers and replaces all the body mounts. I used the same size spacer for the cab, bed and core support. The bed of the truck now sits about 1/2" higher than the cab. The body lines don't line up.
I could go back and cut down the spacers for the bed and fix the problem but I was fairly certain that they should all be the height. Has anyone replaced the body mounts on a 69 truck that can tell me if all the mounts should be the same height?
Thanks.