Stuka wrote:I have always assumed that there was only one big window. But, I have never broken out a tape measure and measured the differences. I don't have access to an older truck, but maybe somebody else here does and we can get some comparisons going.
On my 71 Gladiator
As you see it installed and all measurements from outside
The rubber seal measured horizontally at the very bottom... end to end of rubber is 54 inches
The rubber seal measured horizontally all the way at the top ... end to end of rubber is 48 inches
The rubber seal measured vertically at each end of the window... top to bottom of rubber is 16 inches
The rubber seal measured vertically at center of the window... top to bottom of rubber is 16 1/2 inches
The Window frame measured horizontally at the very bottom... end to end of exposed frame is 52 1/2 inches
The Window frame measured horizontally at the top just before the curve... end to end of exposed frame is 47 1/2 inches
The Window frame measured vertically at each end of the window... top to bottom of exposed frame is 14 inches
The Window frame measured vertically at center of the window... top to bottom of exposed window frame is 14 1/2 inches
This truck originally had stationary glass. I found this window NOS a few years ago. It was made in the early 70s.
I used the original rubber seal so I can't help with a recommendation.
I have the original stationary glass in the box that this slider window came in. The dimensions of this slider window is marked on the box (I will take picture)... and I will get an exact measurement of the stationary glass and add them to this post.