Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Be aware that there are two pieces. The inner piece is held to the roof stiffener by plastic fir trees. The outer piece that shows pops into that.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Pretty sure I have the front and rear metal pieces, two of the middle trim strips and one of the black plastic pieces the middle trim strip pushes up into. No corners.
Kinda looks like you've got the inner piece but it's different than my '84.
Sic friatur crustulum
'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
Kaiserman wrote:Pretty sure I have the front and rear metal pieces, two of the middle trim strips and one of the black plastic pieces the middle trim strip pushes up into. No corners.
I could use the rear metal piece. Ideally blue, but I'll take any color.
do you have any extra strips for the headliner seam? the plastic like piece that pushes into the metal rib to hold up the two halves? id be interested in one if you can tell me what it came out of and its length so I can make sure itll fit my 79 2dr widetrack. PM me a price and shipping cost to 60451 we will see if we can work something out! thanks in advance.
79 CC aka PathKiller. 6" lift, 36" TSL's, 360 AT QT, Edlebrock intake a 4 bbl, stainless headers, one off stainless exhaust.
01 XJ 7.5" lift, 33" Dunlop Mudrovers, steering box upgrade and PS cooler.
Kaiserman - do you still have the strips? I am missing the rear strip in my 78 Chief. Would love to be able to replace it as I am about to drop the headliner to insulate and sound deaden the roof. Currently there is a tan tape holding the two pieces of the headliner together.
Also, do you have any of the coat hangers? One of mine is broken. Not as big of a deal to me as the strip though, would rather have that.
I actually just fabricated my own yesterday. Got a piece of flat aluminum 1/16th thick and about 1 1/2" wide. Bent it to fit up the sides and tuck into the channel on either side. Then drilled a 1/8" hole in both the aluminum and the old support bow that goes between the two halves. You have to be fairly precise and drill right on the peak of the support bow as it is rounded and does not have much surface are to drill. Drilled it in the center and two spots about 15" either side of center. Three panhead screws later I have a nice secure homemade bow that holds up both pieces nicely and should last a while. Much easier to take down and remove.
Next step is some etching primer and paint the same color as the headliner.
I know this is an old thread but I am trying to find the plastic transition piece that goes between the headliner boards. I is called seam trim in this thread. Anyone have any ideas where I can get that piece?