Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Does anyone know where I can find the parts that make up this seal between the axle and spindle? I'm having trouble finding the right stuff. I need the 4 pieces from the metal seal seat in the back to the rubber washer in the front. I've attached a picture. Thanks
You do not have the required permissions to view the files attached to this post.
Sadly I no longer have the photos that I used to have, most likely buried on some drive some place. I assume you have disc brakes up front, as I KNOW the seals are different for drum vs disc.
thanks- I have the spindle kit. its the one on the end of the axle tube that I am wondering about. I'm not ever sure if there is supposed to be one based on what I read its an aftermarket thing. There does appear to be a seat for one on the lip of the tube though.
Are you talking about the tube on the axle housing? If so, I think you are talking about the seals on each side of the carrier. The axle tubes are dry on the open knuckle design. The 79 TSM does not show this detail.