Mars wrote:One man's trans leak is another's penetrating oil
Pics will help.Hendo2.5 wrote:I got the spanner from Amazon and it worked great! I have a new problem: I bought what I think is a pretty standard ball joint press. Problem is that it doesn't quite fit into the top joint once I add the top and bottom plates and the cup that goes around the bottom of the joint. The cup is about 1.75 inches tall. Do I need to find a shorter one or is the press too small?
That's exactly how I do mine, except with my air hammer on the lowertedlovesjeeps71 wrote:To be honest, I use a stout ball peen hammer to knock out the lower. Then set my press up similar to this to press out the upper.