Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
My 89 GW was missing the stock York A/C and compressor brackets when I bought it so I decided to install a Sanden A/C. Only problem I had was mounting the alternator. I thought I had a workable arrangement but after about 500 miles, it did not look so good. The alternator has developed a tilt due to the belt pressure and lack of supports to keep it properly aligned. I used several brackets I scrounged from other installations but they do not provide the needed support. I think I need the alternator brackets that were used on the 90-91 GW with the Sanden compressor. I have not found a good picture of the 90-91 alternator setup. Can someone post one or offer a link to one?