Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So I need new filler neck tubes. The one going to the tank is straight and should be an easy replacement. However, the one going to the actual fill port is also cracked, but BJ's stocks multiple shapes and styles. Could you guys identify what kind I need to get? I have pictures of the tubes, and the fill port has six or eight bolts going around the tube. Pictures are attached below.
According to the book, it's a single year for that number. It's the same shape for '74-79, but detailes change. I expect the main differences will be whether it has a rubber flange on the filler end, or whether it uses a band clamp to attach to the filler neck. The numbers "evolved" for '77, but the part for '77 may work.
AFAIK MTS is the source for all these fuel tank parts, and they show some good pictures on their site: http://www.mtscompany.com/J-truck.htm Look at the JPFH numbers for the '62-77 tanks, and match what you have now. You can buy direct from MTS, or they will refer you to their retailers.
I bought a 3' stick of straight hose of the right size for my '77 on close-out from RockAuto, and I'd be willing to sell some of it if you need some; say, $1 per inch plus the ride.
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS/PDB, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination A/Ts, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
Dual Everything: '15 Chryco Jeep Cherokee KL Trailhawk, ECO Green
Blockchain the vote.