Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I want to replace the wiper arms on my 79 J10, the oem DS arm has smaller parallel bar running up the side of the arm, not quite sure what its for, anyway I ordered wiper arms from Team Wagoneer and received ds arm labeled Crown Automotive Sales part# 55155649, which is black and have no arm but does have a tab sticking out of the side of the base (lower post end) which could be for the stud at the base (if I remember this right), anybody used this arm on their own FSJ's and do they work ok???
The piece on the side is to keep the wiper at the correct angle during it's travel. I suppose you could make an arm without it that would work but it's there for a reason.
Good originals are cheap if it were my I'd fend a set. I might even have some.
Thanks for the reply still putting my J10 back together and don't have the wiper towers working yet, have a couple of DS arms but loose and wore out, have to wait and see