Sent from my iPhone using Tapatalk
Proportioning valve distress
-
az chip
Topic author - Posts: 1433
- Joined: Tue Jul 14, 2015 8:59 pm
- Location: Mesa, AZ
Proportioning valve distress
My valve is very crusty and I don't trust it. So I got a new one from inline tube. I cannot tell how this valve resets or even moves! And it's freaking new. Any help much appreciated.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
-
Cheap Hobby
- Posts: 649
- Joined: Tue Apr 22, 2014 12:53 pm
- Location: Central Valley
Re: Proportioning valve distress
The reset is the pin in the last photo. Loosen the outer nut and hold down pin while bleeding. There is a tool available or you can make one. It holds the pin down while you bleed. It is held in place by the valve mounting bolts. Tool fits many models and makes.
79 Cherokee WT QT Golden Eagle white with gold windows "Pigger" only blows hubs the night before a road trip or the clodest night of year. Has only been towed cause of stupid.