Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I just bought a jeep brand 2" receiver hitch. Interestingly enough the hitch looked like any other 80 era truck hitch. But there were braces inside the frame rails also. So if you find one on a donor car. Make sure to get the braces if it has them.
Sent from my SAMSUNG-SM-G900A using Tapatalk
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift
I can fix it or fix or I can fix it where no one else can."
candymancan wrote:Is it just me or is the v style only held on by two bolts lol ?
It's held on with 10 bolts on mine.
SparkyB wrote:My 78 Chief had this on it.
Sent from my SM-S920L using Tapatalk
That looks like a Valley hitch, usually installed by the dealership. My Cherokee came with one of those but I removed it and put a factory 2" receiver under there.
Last edited by HeavyMetalThunder_81 on Sun Apr 09, 2017 1:15 am, edited 1 time in total.
-Jonny B.
1979 Cherokee Golden Eagle - UNDER CONSTRUCTION
7" lift, 35x12.5x15
AMC 401 - Pro-FLo 4 FI
NV4500/NWFBB/NP205 - Triple Stick'd
F D44 - 4.10, Eaton E-Locker
R M23 - 4.10, Detroit Locker
1979 Cherokee Chief - Parts
1979 Cherokee Chief - Parts
1979 Wagoneer - Sold
1981 Cherokee Chief - Cubed
I believe that is aftermarket. Factory would have been "V" shaped for your year. Someone correct me if I am wrong.
-Jonny B.
1979 Cherokee Golden Eagle - UNDER CONSTRUCTION
7" lift, 35x12.5x15
AMC 401 - Pro-FLo 4 FI
NV4500/NWFBB/NP205 - Triple Stick'd
F D44 - 4.10, Eaton E-Locker
R M23 - 4.10, Detroit Locker
1979 Cherokee Chief - Parts
1979 Cherokee Chief - Parts
1979 Wagoneer - Sold
1981 Cherokee Chief - Cubed
This the hitch I recently bought. For my 82 also pictured is the brace that goes inside the frame on either side. You can see the 2 bolts going throught the side of the frame in front and behind the spring mount.
Sent from my SAMSUNG-SM-G900A using Tapatalk
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift
I can fix it or fix or I can fix it where no one else can."
If you look closely where the ball mounts it should have Valley Industries stamped into it. Same company that made those super flimsy swing out tire carriers back in the day. My '79 Cherokee had the same hitch when I bought it and I immediately bent it pulling an 18 wheeler out of our septic field where I used to work. I've since replaced it with the factory V style hitch.
-Jonny B.
1979 Cherokee Golden Eagle - UNDER CONSTRUCTION
7" lift, 35x12.5x15
AMC 401 - Pro-FLo 4 FI
NV4500/NWFBB/NP205 - Triple Stick'd
F D44 - 4.10, Eaton E-Locker
R M23 - 4.10, Detroit Locker
1979 Cherokee Chief - Parts
1979 Cherokee Chief - Parts
1979 Wagoneer - Sold
1981 Cherokee Chief - Cubed
If you look closely where the ball mounts it should have Valley Industries stamped into it. Same company that made those super flimsy swing out tire carriers back in the day. My '79 Cherokee had the same hitch when I bought it and I immediately bent it pulling an 18 wheeler out of our septic field where I used to work. I've since replaced it with the factory V style hitch.
Im sure it also said 1500 lbs max trailer weight. Not 80,000 18 wheeler.
Sent from my SAMSUNG-SM-G900A using Tapatalk
82 wagoneer 360 4spd
with a well lubed driveway.
4 inch skyjacker lift
I can fix it or fix or I can fix it where no one else can."