Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Title says it all: when switching the headlights on in my '86 GW the clock turns off! Even when park lights are engaged. The dash dimmer does dim the...
Last post
Yes they do. It was supposed to be a modernizing update and eliminate the battery power sucking analog clock. The heat became the problem and the...
I will admit I am not a carb guy and I think this is a square bore but I am not sure... It's a 75 Cherokee with the 360 4 barrel factory according to...
Last post
I'm in East Tennessee once the proud home of Tellico..... Now you can fish here and drive around and look at the leaves but the tree huggers won't...
I changed the fluid in my QT a thousand miles (15 days) ago and it began to slip stick. I used crown tcl and filed both units as described in my TSM....
Hello. I am new to the FSJ Network. I have a 88 GW, she is a beauty :D she lives in Boston's and Orleans Ma ( Nauset )
I have upgraded the carb and...
Last post
That is a great price on the Bilsteins from BJ's. I thought they stopped carrying them for stock height is why I never went there for them. That and...
I have searched quite a bit but haven't got a clue on the torques needed to tighten up a TCI 128000 pan to my GW's 727. It has the rubbery gasket but...
Last post
Check TCI website under installation to see if they lost any thing. Also can not remember if their pan is thicker. If it is you may want to check how...
I am looking at this wag next week...its a 1980 Doesn't look like a faded $12.JPG spinaker blue? Needs wood grain kit and paint... rust area patched...
Last post
I had an '82 Cherokee that color (rusted to heck!)
A little introduction. I am from Mid Michigan...about 2 hours north of Detroit on the east side of the state. I run a custom shop (classicdaily.net)...
Last post
Welcome welcome welcome!!! It's good to hear of another FSJer so close. If you ever want to have a wrenching party or just a couple beers somewhere,...
I really like the wagoneer how it sits from the factory. Other than very mild beach driving in the summer and I presume loading it up in the winter...
Last post
I wouldn't go with Team GW. I haven't had very good luck with them. (Though I've not bought much, mostly trim/electrical). If you're going to get new...
Hi all! This is my first post here. I am migrating over from another forum which seems to be lacking stability. By way of introduction/show-and-tell,...
Last post
Shortly after the last update, our beloved Grand Cherokee had an untimely off. I briefly considered swapping its Magnum 5.2/46RH into the J20 but...
I finally decided today was the day to finish the boogie grill install. This was delayed by the drivers axle coming out almost a year ago now, which...
Looking for a front winch bumper and matching rear bumper. Ive tried the search and see some guys have built are there not any aftermarket? Is there...
Last post
Looking for front and rear bumpers that look made this century, not a 3 or 4 inch round tube like the 80s or 2x4 or 2x6 like bj's offers.
1) So, I used a slide hammer to remove the axle and bearing. I assume there is some kind of internal puller I can attach to the slide hammer to...
Last post
Ok, one last set of questions. I have been to several hardware stores and nobody can get those nuts. So, any issue with re-using them with some lock...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum