Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Is this normal or acceptable for the bearings to rotate slightly. The notch in the rod and cap are deeper than the notch protruding from the bearing...
My local, privately owned parts/machine shop is carrying Hastings brand oil filters now. I did an oil change this weekend and got one of these...
Last post
With my last boss we always used Hastings filters for our synthetic oil changes, or for our good customers. They are a quality filter, and can be run...
Anyone know of a good quality source for window cranks for my 86 J10. I bought a set from Napa, they were made in china and fit so sloppily I didn't...
Last post
I needed three window cranks and two inside door handles when I got my ragged '79 Wag, I found them all on ebay, total cost was about $25.00 for all,...
I was out looking for a new project and came across this 1980 Cherokee Chief. I was in the neighborhood so I stopped by to take a look. I'm sure glad...
Last post
Nice find. It looks like a super clean Jeep. Looks like it would be easy to get it ready for paint.
After debating for days, I took my waggy to get the tranny and Xfer case rebuilt. My guy is very methodical and has a long line of customers. I told...
Last post
Viscous couplers are basically a go/no go unit. If the coupler is ruptured then it can damage the rest of the internals because it's like liquid sand...
The 19th Annual PA All Breeds Jeep Show is coming up on July 19 and 20 at the York Fairgrounds in York, PA. This is the largest all Jeep show in the...
Last post
I'm thinking of coming up in The Wackyneer.
'88 GW, Cordovan with Maryland historic tags. I feel comfortable saying there won't be any others that...
Getting close to swapping motors in my 86 J10 Auto, taking out the tired 360 and replacing it with the fresh 401 I am building. Have Hedman headers...
Last post
Pulling the front clip makes things easier. but is not necessary, especially when you consider the trans tunnel floor plate... just unbolt that plate...
I heard a rumor today about a local shop building a Cherokee Chief wide track with a Viper V10 in it. The guy (who works at the shop where the build...
Well my wood grain kit overall in good shape but the trim pieces in some areas are starting to separate and the tape holding them on the...
Last post
Wish that was the case, body is great but will need paint in a few years, looking to buy some time and do as the mentioned hopefully and touch up key...
Does anyone make an interior roll cage kit for a J10?
Last post
If your Casper is Casper, WY, you should talk to Hank at Hanksville Hotrods. It won't be cheap, but it would be outrageous, either. He does VERY nice...
Can anyone please tell me what size socket/wrench is needed to remove the fill/drain plugs from a NP-229-AT in an 1989 Grand Wagoneer? An adjustable...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum