Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So, i need to get tires for the J10. Since the J10 will be seeing more snow duty, I have got to ditch the TSL's as they suck in the snow. Well, they...
Do fitted seat covers exist for a '78 Cherokee (bench front and back) ?
I checked a number of sites but they don't have anything to fit this model...
Last post
Trouble is that you can get customs made for the cost of the Okoles. Upholsterers will often throw in a few freebies to get your business like a dash...
I am trying to order some new ubolts from BJs so I can do my spring swap and I need to provide them thickness of the spring pack so they can provide...
Last post
9/16 is still not 5/8 though :D
True, but I would not consider them small for the average FSJ. The 7/16 ones however sucked.
Just out of curiosity is is possible to run the parking brake assembly from a M715 on my '66 Gladiator? I know my truck has the e-brakes in the rear...
Last post
The side vents often let rain in on the old rigs, just so you know.
OK N00b question...
Should I have a sway bar on my '76. The only thing I find on the front axle is the steering stabilizer (or is this also known as...
Last post
Tatsa, Does your alternator stay cooler mounted like that? ;)
An opportunity has presented it's self to buy a 77' widetrack with a running 401 swap to replace my dead 401 in my 74 NT. But it occurred to me this...
Last post
You really do not want to change too much on a 1st year NT Cherk.
They are pretty rare.
Do we know exact numbers for the first year? With the 401?...
I have a 1972 j2000. it has the one piece headlights. You have to replace the whole thing not just the bulb. Does anybody know where I can get a pair...
Screen Shot 2014-09-05 at 8.38.55 PM.png Didn't want to pay for a rack and didn't like the look of any manufactured ones, it took about 2 days welded...
Last post
I think that's awesome, it's a helluva lot better looking than those bent tube jobs you see running around, it looks beefy and workhorse-like. I dig...
My now style headliner was trashed when I bought the truck 4 years ago and has been getting progressively worse. The rate of failure has accelerated...
Last post
Two things:
Early style bow headliners can be expensive to replace, but if you can remove the headliner while keeping each of the panels intact and...
As we wrap up the sheet metal work on the 62, I am hoping to wire the ignition up GM style before we pull the drivetrain. I have two questions about...
Last post
The two constant wires go to the bat power on the GM switch, though GM only used one. It was fused (fusible links) from GM.
Earlier today my 401 decided to throw something out of the bottom of the oil pan. I BABY my baby, I wont even drive her up 1-70 because I don't want...
Last post
In my experience engines that were poorly maintained throughout their lives tend to die from cumulative causes, no oil changes = low oil press. +...
So my parents would like to take charge of my motor replacement plan now that they have learned of my plans to do it on my own. Damn. They wan't to...
Last post
Of all the factory engines, I've seen more builders screw up Ramblers than any other make. I guess most is inexperience/lack of knowledge with AMC's...
If I were to take a motor out of a newer FSJ mated to a TF727 and put it in my Cherokee mated with a TH400 what problems would arrise? Would it be a...
Last post
No. No I haven't. I assumed it would be reusable. I will order a new one if I decide to go down that path with my swap.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
