Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So I am still early in my build, but as a young’n I don’t want to deal with carburetor stuff. I was pricing out an upgrade on my 89 GW from the 2bbl...
Last post
For the vast majority of AMC V8s the 2v is plenty.
So about a year ago I bought a 1987 Grand Wagoneer. In about 1999, a previous owner had put in a fresh 401 and a Howell efi system. It looks like it...
Last post
sounds like typical failed coolant temp sensor
when they go bad engine thinks it's way cold and they're absolutely pig rich
I'm in the active research stage for putting EFI (Edelbrock Pro Flo 4) in my waggy and decided to create a thread to document my process and also to...
Last post
Update, my new distributor ate my cam gear for lunch after a few weeks of driving. Now having to replace both the new distributor gear and the old...
I would like those of us who have experience with the Novak Drop in EFI Pump and Sending unit assembly to chime in and let us know how it is working...
Last post
After owning and messing with the Sniper unit and the stock tank for quite a while and never being fully satisfied with it, I decided the best thing...
Getting ready to install a Holley Sniper with a Robb MC Surge Tank setup.
It is being installed on a 91 GW that is currently stock. My question is...
Last post
My timing settings won't help you much since you are able to use variable timing with the Hyperspark. I am still on a stock distributor, so my timing...
Well should I document the install and opinions of this here?
Last post
Agreed Stuka, I have screwed around with several aftermarket EFI’s with mediocre results, went all GM (04 Tahoe) in my J10 and am so pleased with how...
I finished installing the Holley Sniper on my AMC 360 this weekend and wanted to do a detailed write up on the install for anyone...
Last post
Great write up, I would like to install this sniper on my uncles Jeep but was not able to find the correct kit, would you be able to provide the link...
Looking for cam recommendations for the Proflo4 install on a amc360.
My current cam is a K8600 from the 2008 rebuild. (
I'd like it to run smooth...
Last post
I am not an expert. I know a bit about how engines, cams and such work. When I mentioned to my engine builder that I was going to use fuel injection...
Hi guys, I'm new to this forum. I purchased a 1989 GW last summer as a rolling project. I've been slowly learning and addressing issues and have...
Last post
FYI....I found RT Fabrications and Restorations in Finksburg MD. Just spoke with the owner and he does several EFI installations on FSJs and CJs. He...
After reading about Melford's issues with his Sniper system, I thought it might be helpful for those running a Sniper system on their rigs to post...
Last post
I wound up finally upgrading my charging system to a 100 amp powermaster 12SI alternator. Ran all 4awg cables. Upgraded my grounding cables as well....
Hey Guys- I am looking into installing a hydra mat in my 1987 Grand Wagoneer. Has anyone installed one of these? If so any experiences you can share?...
Last post
The holly hydraMat is the single best thing I have purchased for my Jeep. The guys at Wagonmaster put it on for me and now I can use every drop of...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
