Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Here goes nothing, going to fuel inject my 258 J10. To put it lightly I have no clue what I'm getting into. I've done a TON of reading and the more I...
What is your average mpg with your Gen III/IV swaps? Please give some insight into your set up as well, transmission, gear ratios, tires, roof rack,...
Last post
I have really considered an aftermarket system. My buddy is running a turboed lq4 in his '73 Camaro, he is selling it and swapping in an l33...
OK, now theoretically what is the easiest way to make a 91 Wagoneer with fuel injection and a 401 pass emissions inspection? Obviously, an emissions...
Last post
Thank's for chiming in Bill, I thought you might offer some insight. Looking at the regulations in CO it seems that a home made system should be able...
Picked up a TBI system with a painless harness. Still studying the binder FAQs on how to convert the distributor (preferably without pulling it from...
Last post
Instead of jumping all over looking at different write-ups you can find everything you need in one place in the injection forum on binderplanet.com....
Are there any readily available MPFI AMC 360 manifolds on the market?
I have numerous chevy parts including an entire engine with an edelbrock pro...
Last post
That's my big problem, cause I hope it never breaks! I pulled it from some random GM car in the junkyard and did not pay attention to what it was!
I...
So, I've read a lot of conflicting information on the performance increases that result from going to TBI. Some people say that you'll get 0 hp and 0...
Last post
LOL
You guys will go to no lengths to defend a carb. :-)
It amazes me sometimes the things I see posted on the web.
Now that I'm coming in on the home stretch for my truck, I'm thinking ahead to a next project. And as always, I like to patiently surf craigslist to...
Last post
car-part.com
This is a dismantler search engine, same thing they use if you call your local place and ask for a engine.
I will be installing the Hamilton kit on my 76 wag (401 with TH400) soon and was researching kickdown with a TBI setup. I came across an old post on...
Last post
Deleted my comment. I didn't read all the posts thoroughly
Since I'm still in the what if stage for my next project, I have come across another idea and wanted to gather some input.
My vague plan is to find...
Last post
I know, I was just joking around. Giving you crap for an ls swap as it were.
If I had to do my engine over again, with the junkyard resources I have...
I am swapping in a 7747 ECM into my dually. I REALLY don't want to cut the FW as it's in really good shape and I'm swapping in the vortec 8.1 here in...
Last post
Nice to hear! I wonder if the lack of weatherproofing was more of an issue as to why GM put them inside.
I have the jeep running about as well as possible with the carb. It is pulling a steady 21 HG of vacuum at idle (Has issues on the road but they are...
Last post
Thanks for confirming Babywag.
I try over and over to explain this but it seems to fall on deaf ears.
Maybe I don't own enough AMCs to have enough...
I have been looking at the various systems and trying to decide how exactly I want to proceed. I am going junkyard harness modified and rebuilt...
Last post
AutoProm is awesome. The only reason to use the Burn2 is if you need to use a larger chip. Some other ECMs will require a larger chip if you want to...
Hello, I am collecting parts for my junk yard gm tbi conversion on my 88 wagoneer. I saw a write up on it that uses a chevy hei big cap distributor,...
I know its kinda vague, but i found a couple of mid-90's GMC rental trucks in a 'yard' near me (NOT a pull it $$$)
and both had 454's. I was looking...
Last post
Being a rental truck would mean auto and probably auto overdrive so that would narrow down the PCMs.
If non OD auto
1228747
87 - 92 C/K Truck, Van,...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
