Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Just a note at the start, there are a couple projects ahead of this one, so it may take a while before things start to move. Even then my pace can...
Last post
Not to keep stealing the thread here, but I have 3:31's in my '84 GW w/401/727 and expect I can pull a newer/lighter (4800 lbs) 28 ft camper easily....
Not sure this qualifies as a build thread, more of a repair/restoration build, but I purchased an 83 wagoneer limited about two weeks ago to work on....
Last post
Glad if it helped.
Yep, it's fused but you don't want to blow the fuse. At best that's inconvenient (there may be a spare stored in the meter) and...
New to owning a FSJ, and brought home my first this past weekend -
1984 Grand Wagoneer - 401 ci (to be verified)
Auto
4 inch high...
Last post
Replaced hot wire from solenoid to starter, let truck warm up to temp, and actually started again.....twice. Not the really hard crank/no start like...
I'm new here and have posted a few things about this truck all ready but have reached the point its time to start a build thread and have all of my...
Last post
So many devices we carry around nowadays already have clocks on them, so will not miss another gadget to remind me to be somewhere at a certain time,...
Has anybody added electric parking brake to their FSJ? Are any brands better than/easier to use than others? In the beginning stages of reorganizing...
Last post
So it activates and locks in place, then needs switched to release again.....ok makes sense.
Hey everyone, I'm in the beginning stages of a frame off rebuild of a 78 Cherokee Chief W/T, this thing has 56K on it and virtually no rust except a...
Last post
My valve covers finally came in after 11 months and had my son put them on, not much that's going to happen for awhile until I'm home...
There are a few threads that touch on this in general. I have the 1979 Tech Manual and wiring diagrams but my ‘79 J10 has a few differences. It never...
Last post
On most all older dome light systems, the bulbs are fed constant 12v (orange wire) and the ground side (gray or white) wire is grounded thru the...
Hi all! My name is Seth, I live in SETX, and currently a senior Electrical Engineering student and rebuilding a 1986 Jeep J20. This is my second FSJ,...
Last post
Nice rig! Enjoyed reading the build thread.
I was cringing a bit when I saw the pictures with the camper hanging off the back of the truck as I've...
hey everyone new to the forum . working on a 6.4 hemi swap on a 76 frame right now and hoping to find a wide track body to replace the narrow track...
Last post
Home stretch …hopefully. Almost wrapped up with the frame , need to finish drilling holes for skid then make gas tank skid , finally drill holes and...
So, we know that rear Cherokee fender flare rot out. We know that these parts are no longer available. We also know that the Jeep Pickup used a very...
Last post
Very good point on the fiberglass flares.
Thanks for all the good work.
Will you be posting more pictures as you finish them up?
Hello everyone, this past fall of 2023 I started building up my 78 Cherokee Chief project that I bought back in 2017. Some unfortunate circumstances...
Last post
Next project up was is installing the transmission. I've planned on using my Dana 20 Tcase instead of the quadratrac Tcase and thought I just needed...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum