Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hey guys I found this site www.mrllighting.com on one of my facebook groups seems pretty cool and relatively inexpensive for LED bars and headlights....
Last post
he sells an h4 capsule type bulb here on the mrl page, and the housing is up to you. I have h4s and old apc housings, looking for a upgrade for my xj...
I bought there kit for a Dana 44, and it looks really nice and well thought out. But I am not for sure how it goes together and have not been able to...
Last post
I bought the very first one they sent out. I ended up having to put a 1 block in so the caliper bolt would clear the spring. Yep, lots of little...
I had took my heater out several year ago and it get cold in the desert when we are out wheeling
so I found a center heater out of a van and mounted...
Yesterday and today I spent some quality time under my '89 (LY5/4L60E swap) replacing the NP229. As my spare is now in my Jeep, I thought it might be...
Last post
I've looked at the np241or before because it had 4:1 low range and will mate up with the tf727 in my G wag. can't find any within my price range at...
For the folks who are trying to reinforce the frames for their FSJ, what are you guys doing to minimize frame flex and strength? Pics please :shock:...
Last post
I haven't seen a light duty truck frame with anything thicker than 10 gauge. Newer trucks just use stronger steel.
I almost have my wagoneer back on the road and have a little dilemma with the Hydroost and power steering. The truck only gets started once or twice...
Last post
I just rocked the wheel and pumped the pedal till PS kicked in. Just make sure it isn't a loose belt. My line has a Y instead of a Tee.
Yet again, I might just like to spend money, but I thought it would be a good idea to have the wood panels on the GW painted on instead of a decal. I...
Last post
ghcoe, your roof looks really good, I definitely need to look into the roll on idea. .
Mix with thinner 50%, keep the roller as dry as possible and...
I found this AMC 360 build on HorsePower TV while scanning the internet, there are some interesting mods and it's quite impressive.
Last post
That was fun to watch. They did so much neat stuff in that build. I wish they'd had more air time to break it all down in more detail. It was really...
I'm getting organized to build a 401 for my Wagoneer. Block is not yet at the machine shop, but it's standard bore and I'm pretty certain 0.010 will...
Last post
I know nothing about quality of these but they come in std and .020
Hiya, I have a 350 chev in a Right hand drive SJ Cherokee S and I was wondering what extractors/headers to go for, the engine is from a 68 Comaro and...
Last post
Not the best picture of the exhaust, but Block Hugger Headers give you a lot of clearance. I have extra drivelines and stuff to worry about, and the...
I just got some used 4 springs but no shocks, anybody know what length, shocks are required for a late model GW with a 4 lift? If you happen to know...
Last post
Perfect, thanks so much, at least now I know the dims.
Thinking of replacing my summit racing carb with a truck avenger. Who has done this on their daily driver and how was it? It's mainly a dd and tow...
Last post
I personally like the TA. To me, they are easy to tune and easy to put a kit in. If I get out wheeled by a lawn mower, I just hope the blade has been...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
