Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Looks like my rear end is going out so it's time to regear. I currently am running 31s with the possibility of 33s in the future and have a 5.3/4L60E...
Last post
Mines a beast. I think it may be faster than my 14 raptor.
I have an 87 J20 with a 360. Edelbrock Performer cam,carb,intake and timing set. I know a lot of guy's with points swap to the GM HEI setup. Would it...
Last post
It's going to have to hold together for a little while- I've got other stuff in mind right now....
I am getting some loud pops and bangs when turning hard. I have similar sounds going strait but think maybe pinion angle. Not sure what could be all...
Last post
problem solved I think. I did NOT reinstall the shims.I guess I know what I have to do today.After I get longer u-bolts.
I want to replace the front seats in my 88 GW, I would like power, reclining, leather, heated, and would like to keep room for a center console. What...
Last post
The Lincoln seat looks good, I did find some Dodge van seats that would work, I am not sure I can figure out how to wire the seat heaters.
I'm trying to get the cherokee bug free so that when I do my tbi conversion it is running as close to perfect as a 40 year old vehicle can so I'm not...
Last post
Pretty much everything is brand new. Rebuilt engine, new HEI distributor with my old (but still new gear which I checked and is perfect with 300...
Don't get me wrong but I think the stock position for the front leaf spring mount is in the correct position. Why move it to the rear with this kit?...
Last post
Thank you. I'll do some reading on it. In more for off road, slow speeds, and cruising around the mountain. I live in the forest where my beast...
Last year I was in a wreck in my 81 cherokee because I couldnt stop quick enough. I was fine and the lady I hit was fine (totally her fault, straight...
Last post
Did you replace all the original brake lines when you went hydraulic? If so, did you change tubing diameter? Doing my 69 now, new lines are in the...
Blew my rear Dana 44 with 4.09 gears . Woundering if another rearend will bolt up to my driveshaft yoke thanks
Last post
Is it a late '72 or was the QT swapped in? First year of production was '73 (My '73 J4000 was near the front of that line as it was built Feb '73 and...
Clearly many of you have made the switch to MSD ignition. As my previous posts show, I've been dealing w intermittent spark issues. So I've...
Last post
Black & white from someone that runs one. The resistance wire makes absolutely NO difference. As Tim says check out the wiring instructions. The old...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum