Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Are they worth it? I just got my Cherokee back from getting a front end alignment and complete brake job. Wow! What a difference brakes make. It’s a...
Last post
The top of the tires stuck out further than the bottom. Toe was fine. Now it is 75% better. Just looking for 100% (if it is possible). Hopefully my...
Hey guys, I have a few questions. On my 84 wagoneer, I currently have all stock drivetrain/axles. I am gathering parts to swap in a T18/D20 and want...
Last post
:-bd Thank You. Now I am on the hunt for a front axle :D
I am in the process of installing LED replacement bulbs in my dash. Is there an easy way to test the dash while it is out? I would hate to install...
Last post
And here I thought I got this! Now I am just where I started, sticking new bulbs in at least all the bulbs I put in does work so if they don't when I...
Arg!!! this is my edelbrock 2131 and 1406 thread. Just swapped, everything started fine, rev'ed good, but I had no acceleration in drive. Once I put...
Last post
Oww! Wonder what did it? Cam walk, seizing oil pump or?
Ok. My son and i rebuilt the 360 in his Wagoneer. Stock everything except for a Lunati Voodoo 64501 Cam, Edelbrock Performer and a 600cfm Vac....
Last post
Thanks for the link. The carb was purchased used, so I have no idea what was done to it previously. Unfortunately when my son rebuilt it, he did not...
:?: I had my Cherokee lowered in the front to make it sit level. Now the draglink is at an angle. It has a drop pitman arm on it and now the Pitman...
Last post
I thought so but wanted to double check. I am so ready to have the steering sorted out so I can drive it when I want and not be afraid I'll be thrown...
Just wrapping up my wide track conversion, to include rear disc brakes. Pulled the master cylinder to pull the residual pressure valve/combination...
Last post
Ok got a perfect fix this morning. Found out that a mid 90's chevy 1/2-3/4 ton (disc front and rear) is a direct bolt in for the 89 grand wagoneer. I...
All of the speaker grilles proudly announce the state-of-the-art sound provided by the 'AccuSound by Jensen' premium sound system. I just needed to...
Last post
Works great. I've hooked up the backup camera since I posted this, and everything is working fine. The navigation unit has really updated maps, so no...
Swappers – I am at the stage of my 5.3/4L60E/NP261 swap where the computer and the wiring are becoming my pain point. All of my swap components are...
Last post
I just got an email from Brendan at Lt1swap. He said that the neutral safety switch shouldn't impact the ability to turn the starter over. So I have...
So back last year, I goofed with the fan shroud and the fan, using a mercedes 8 blade fan diameter of 18 (ours are 19 ) off a 560sl. If you remember,...
Last post
That has to help. Our stock shrouds are so small and there is that huge gap on the bottom.
Exactly, I can see a tremendous change, a slight...
So I've pretty well decided that I'm going to swap J20 axles under my Chief while I'm doing the frame-off, and I bought a 74 J-20 for the axles, but...
Last post
jaber, i don't necessarily need a crossover, but I will need a y pipe as I don't want to run dual exhaust. (no real reason other than I've had them...
Are there leaf springs from another vehicle that can be
\used on the 90' wag? Need to replace the ones I have
they are beyond shot, they are flat...
Last post
Nice thing about being in the PNW is that I drove up to Mcallister Spring in BC, Canada when I needed springs made or check out some of the ones they...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
