Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hey everyone I'm new here with my new 1979 Jeep Cherokee chief widetrack. I brought the truck home and did some general work to it and am now having...
Last post
I started the truck today and it ran ok but still needed me to play with the gas to keep it alive for about a minute. I'm pretty sure my choke is a...
I found some threads on ifsja about removing all the extra emissions control garbage on the FSJ, however none had any pics. We need to get another...
Last post
On the charcoal canister removal... I learned the hard way and had a lawn sprinkler out of my carb before I drilled the gas cap. The MC 2150 and AFB...
I've rewired my '72 Wagoneer with an eBay harness. One of the last things I have to do on it is the wiper wiring (also the only thing left holding me...
Last post
I found some schematics that will probably help you quite a bit.
I will look at your logic above in a bit...
Me, too, vis-a-vis your images above....
Looking to purchase an 87 Wag locally (North Florida) and I found one with a Dodge 208 t-case. Owner says he removed the original Q-Track and...
Last post
Thanks for all the info. The rest of the GW is good, not as good as I hoped but it has some desirable mods already done - Edelbrock imtake and carb,...
Our 86 wagoneer has a 4bbl Edelbrock......
Edelbrock Performer Series intake w/EGR.......
It's taken a lot to get her running nice, quiet and smooth....
Last post
War Wagon hit on something that is commonly ignored - the ignition curve. If you don't have a TFI setup, get one (HEI, DUI all great too). Take the...
Just started tearing into my 79 j20, got 360 w/4 speed. Not sure exactly but low low gears, gotta push it to run 70. Im new to jeeps and amc engines....
Last post
Nice rig!
Don't forget to pull all the wheel bearings (front and rear) to check for wear and to repack them with fresh grease.
Ok, here is the deal. My son bought an 84 Wagoneer. It came with one of Tad's SOA/Shackle flip kits and a pair of flat top knuckles. The knuckles are...
Last post
The list is shorter. Its taking a long time due to Grant being busy with work and school. Will hopefully finish it up Sunday. Found a leaky outer...
My 1986 J-20 needs new windshield posts. Mine were very rusty under where the windshield rubber was. can someone point me to a source that would cut...
Last post
Hey john, glad you made it...
Check with Z&M Jeeps. He would be the first one I asked. ;)
Looking for info on doing a serpentine belt swap on my '81 258. I figured it would be good to get a thread going on the subject for future reference....
Last post
My '83 and '84 J10s had it as well as '84 up Eagles (if they were built in Canada, they got the serp belt) I prefer the cheaper AC Delco alt so I'm...
The syncros on my t5 are are the way out and I'm growing tires of double clutching 3 rd gear. Ive read a lot about the ax-15 swap for the 258 and it...
Last post
Yup, I haven't changed anything under the dash, mechanically. Note I am running the hydro clutch setup from the TJ the trans came out of. It works...
Just installed a new distributor, wires, coil, and ignition..... When I put the key to the on position the LED on my box blinks five times and turns...
Last post
I don't have an MSD, so I can't compare what you have directly to anything I have. But I would suggest calling them. In my experience MSD has pretty...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
