Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I need a picture of the mounting rods that go from the steering column to the top/front firewall to secure the column. My tub has only ONE connector...
Last post
Thanks Redone! That shows exactly what I needed. I've been trying to use the 82 rods with the 79 tub. Now I have to find the stuff from the 79.
I'm getting ready to pull my 360/727 out in favor of a GM drivetrain.
I was looking at the engine bay last night and I saw a couple of...
Last post
There is one from my doner rig. I'll have a fun time getting to pass the emissions referee's inspection. So I figure my best bet is to use all the GM...
These just came off of Pinky. I'm replacing the exhaust; Y-pipe, cat, and muffler. Maybe I can finally get it to pass emissions?
I've been spraying...
Last post
Well they didn't come from the factory with studs. I always found the studs a real pita on these things. One way to not wind up with all these issues...
Any recommendations for a one piece front mat for a 79 Chief automatic ?
Thanks.
Last post
Walmart used to carry a black one piece rubber floor mat. I had on in an 83 J10. It fit okay, but ended up being a little short on the outside ends....
So i'm just getting around to wiring. A few years ago I pulled the engine and had it rebuilt. Ive added an Edelbrock intake and a Holley carb and...
Last post
I have always done it with the pump on in run and start, just in case.
Makes sense. If the fuel boils off in the carb you'd want the pump to fill it...
I'm going through a spare QT to get it ready to install in place of my leaky unit. Can I remove the drive yokes to replace the seal while the case is...
Last post
If you are going to pull the yokes, try to hit them with an impact gun. Doing them by hand is a real challenge with the case out of the rig.
The truck I have picked up has some more rust than I would like.
The hole in the door skin is not a significant issue. The inner skins and frames...
Last post
definitely. HOOT is good people and one of the most ardent FSJ scavengers I've ever met. He scours the southwest and mountain regions annually. Keeps...
I need some help from those who know how this stuff works!
My 68 Wagoneer has several issues:
1. Turnsignal indicators light up when I apply the...
Last post
FIXED IT!!
Checked all the wiring, cleaned up a few connections and bought a new flasher. BINGO.
Everything works like a dream. Learned a few things...
I've been fixing up a wiring mess on my '84. Got the fog lamps working, dash lights, need a CVR for gauges but the reverse lights are a mystery. Does...
Last post
Was the bent nail OEM? I'm going to check the bushing. It's in for safety right now. Hoping it passes so I can do the real work and still drive it...
Anybody got tips on replacing a mechanical fuel pump?
Jeep won't start- pulled the fuel hose at the filter before the carb and stuck the line in a...
Last post
Cheers guys thanks for the support! Yeah i could have started with looking in the gas tank first, but then would have missed half the fun. I like to...
Going through the rats nest of wiring (my own doing) and trying to sort out what I need for the ls swap. I have the large yellow wire that was on the...
Last post
Great, that is how I envisioned the system working. I am sorting out the original harness. LS harness is easy. I just wanted to make sure that i...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
