Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I found a diverter valve to replace my broken one. (Not oem but it does the exact same thing).
Found out one of the previous...
Last post
CTO are Jeep name for what other car maker called Thermal Vacuum Switch, TVS. Most auto part store carries those, here is a good reference chart with...
1989 Grand Wagoneer AMC 360 don't know any history on the vehicle besides the motor was rebuilt. Having issues getting it started. Will burn through...
Last post
If you get no fuel from the pump, I would next try putting the line to the pump into a gas can, and see if the fuel pump delivers fuel. If the pump...
Did the Chief always come with a trailer hitch or was it an option?
Last post
The hitch was part of the Tow Package, which was available on all models. In certain markets such as the Reno area, the dealers would order their lot...
Ok so after a few times having to use my QT during all this awesome weather we are having in the Eastern Sierras, I still don't have a good warm and...
Last post
We're heading to the Gville Round Table tomorrow at 11. TO check it just need a pair of gloves, 3/8 wrench.
78 Cherokee.... Anyway, I need to take out the gauge panel as the gauge lens are all loose. I have a fear of all things electrical, so I am curious,...
Last post
Thanks Fellas, just the info I was needing!! Robin
Aloha again. I want to know if the shell was black on a Chief. Could they have come black, white, or the whole vehicle one color? Just wondering...
Last post
I've never seen the white Chief decals other than at BJ's website. I heard rumors about white decals back in the day but have yet to find any factory...
Am I blind or in denial? Is this my frame with the huge cut and hole on the side of it? Or an unimportant piece? I don't want this to devalue my Jeep...
Last post
That hole was cut to install the after market fuel tank. Depending on when that tank was made it may not have come with a nut welded to a piece of...
Was looking at my wagoneer admiring the grill this morning, and noticed that behind the grill are two of those pie tin headlight holes (or what I...
Last post
Agreed, the word from my Dad was the panel was designed with those holes specifically for the dressup pie plates. AMC engineers were known for being...
I have a 67 J3000 with an AMC 232 inline 6. I got the truck when I bought my house. It is a plow/farm truck currently. Due...
Last post
Is it a hydraulic clutch or does it have a mechanical linkage? are you sure nobody has ever substituted other parts in the system that may not yield...
Hey Guys, I have an Edelbrock intake and I want to block the Exhaust runners that Heat the manifold. I was thinking of using and epoxy or high temp'...
Last post
A stuck flapper forces the exhaust gases from the flapper side of the engine to go through the intake manifold and out the other exhaust manifold. So...
Heyoo, New to the forum and Ive got a couple of questions. Shop I work at, we are doing a resto/mod on an early wagoneer, 1963. It had power tailgate...
Last post
Awesome, great info. Were gonna source a complete late tailgate for all the parts. As far as wiring thats what I do for this shop haha, so thats not...
Ok I know it's been asked a million and one times before but I would like more specific help for a 258 to 360 swap. Here's the deal, I through a rod...
Last post
One things that I'm sure I'm over thinking is the pilot bushing, according to Novak 76-79 t-18's have a pilot tip diameter of ~17mm, and 72-75 have...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum