Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Hey Guys, I have an Edelbrock intake and I want to block the Exhaust runners that Heat the manifold. I was thinking of using and epoxy or high temp'...
Last post
A stuck flapper forces the exhaust gases from the flapper side of the engine to go through the intake manifold and out the other exhaust manifold. So...
Heyoo, New to the forum and Ive got a couple of questions. Shop I work at, we are doing a resto/mod on an early wagoneer, 1963. It had power tailgate...
Last post
Awesome, great info. Were gonna source a complete late tailgate for all the parts. As far as wiring thats what I do for this shop haha, so thats not...
Ok I know it's been asked a million and one times before but I would like more specific help for a 258 to 360 swap. Here's the deal, I through a rod...
Last post
One things that I'm sure I'm over thinking is the pilot bushing, according to Novak 76-79 t-18's have a pilot tip diameter of ~17mm, and 72-75 have...
I have attempted to successfully stop the rear seal oil leak in my 91 GW twice while the engine was in the car. Both times, I replaced the rear seal...
Last post
wel the tf727 is a 46re with no electronics. basically the same transmission with an overdrive built in.. thats whats on my 5.9l ZJ.. but i suppose...
What is a good replacement/upgrade alternator for the 1991 stock one on the JGW? The original doesn't charge at idle with a/c, wipers, and fog lights...
Last post
Would I be correct to assume if the resistance wire gets hot, very hot. The alternator needs replacing? Because that means power to excite the alt is...
I know I saw a thread 'a while ago' where someone replaced the foam on the doors in their heater box. Does anyone...
Last post
thanks for the information. Yep, that pink or white closed cell foam is what I want. just need to find some in some packing material. I know of a lot...
Ive got a 76 cherokee with an automatic that i'd like to convert to a 4 speed. I've got a 4 speed from an 80. What is the correct transfercase for a...
Last post
The transmission should be a Tremac T-178, which is the same as the T-176 used in the CJs except for the ratios, and the long input shaft and...
So, it's cooling down in New England and I am starting to think about storing the Jeep for winter. I plan on changing the oil, inflating the tires to...
Last post
That's very good to know! Do you think a wide track would fit with the flares?
Yeah, I think you could fit a wide track inside without a problem.
In an effort to totally understand the vac routing on my 87 I traced a vacuum diagram in Bluebeam and put each system on its own layer, the cool...
Last post
Just go to your local auto parts store and get 5 feet if every vac line hose they carry. I hate having to make a trip just for 10 of a specific line....
Hey guys - what's the name of the attached panel? Looks like it's mounted separate from the quarter panel and the rest of the front and is obviously...
Last post
It's called a Valence Cap/Corner and yeah they can be a MOFO to repair.
I welded mine to the fender and forgot about it.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum