Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Sometimes while i'm driving the transfer case will intermittently slip. It never does it in 4L, but does it all the time in 2H or 4H. Sometimes while...
Last post
I would look into it..... I would at least split the case and see what's going on and go from there...
Anyone know what size o-ring to use for the high-pressure power steering fitting on my '86 with the Saginaw pump (I think the fittings were the same...
Last post
the AC green seems to be the most pliable, it did not self destruct... 4 days now no drops.
I was tempted to use the fat one -dimension on the pack-...
I have a stripped frame and want to set the engine, trans and xfer case and work on the trans mount, at that point...
Last post
No problem, I wanted to ask to be sure. I picked up an angle finder and the engine and xfer case are currently sitting at 3 degrees, I will probably...
How far down should the back windows go. I have crank windows and they only go down about 4 inches on rear door. I would assume the 2 piece design of...
Last post
Update. I got into the driver side window. The felt was closed up under the window and dried. That was stopping the window. I flexed it open with a...
I'm going to need new carpet in the 90 after I get the floor finished, and pricing out kits now I'm not super excited about paying an extra $160 for...
Last post
That color, looks more like the wagoneers before they were called GW. They had that pinkish red interior
I've done some searching but I'm stumped. I have a Brougham steering wheel I'm wanting to switch over to a sport (limited) style three spoke steering...
Last post
Assembled pics of new wheel versus old Liberace wheel. Lol
Well, I've been putzing with the '73 J4000, trying to at least get it mobil so I can move it around, and here's my problem:
It starts right up, Idles...
Last post
They never come back for a success or fail report that would help others.
I hate starting new threads for such random and simple questions but here comes another one..
I got the new gas tank straps in the mail today so I'm...
Last post
I've got the rear brake line (that runs along the frame) sitting in my carport, you can have it if you want.
Thanks CK.
Surprisingly the fuel lines...
Finally my standard size rod bearing is coming friday, only took teamgrandwagoneer 2 weeks to mail it out. So everything is ready to drop the oil pan...
Last post
Well little uodate the leak is slowing down. I drove around today stopped looked under for a few minutes and only 2 or 3 drops fell after like 15...
Will adding a 2 inch body lift to my 1988 jeep wagoneer create a big gap in the bumper and body?
Last post
I like body lifts and have been running them on my two FSJ trucks for years--cheap lift and it doesnt stiffin an already stiff ride. I also ran them...
So today I ordered a new bypass hose because it seems the old one is leaking. Ok. It's like 8$ from BJs. By being a cheap ass I'm left with the...
Last post
Yea ive noticed that... my zjs taillights the bulbs are original lol if they go bad i can take the bulb out clean the contacts and they work again.....
Hey guys. New to the forum. Just picked up an 88 Grand Wagoneer and am sorting all the varied issues...
Right now the tail lights stay on when the...
Last post
You can also put your foot under thr brake pedal and lift it up or your hand and push and force it up hard. My 98 5.9 zj had this issue keeping brake...
Replacing a missing headliner and there seems to be only 1 Bow in the track. I'm guessing there should be two? Would anyone know possible source and...
Last post
There is only 1 bow -external- visible from the inside on the 74 and latter. May be in 73 as well... it is between the backseat and the cargo area...
Good morning all,
I have been searching these forums and testing my instrument cluster to find out why my fuel, temp, and oil gauges do not work. The...
Last post
IMG_1613.JPG So here is why my fuel gauge was not working. I dropped the tank which is stock metal version of this one ( Then to get the fuel sender...
Is this the stock ignition lock cylinder? The one I see on BJs and other sites looks different - it looks like the GM and XJ cherokee columns....
Last post
The new one is a different style. The old non tilt columns use an Amc key R4-A. When jeep went to tilt columns they used a GM column and switch which...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
