Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
My steering column broke last night, specifically, the aluminum part that connects from the ignition switch to the relay rod. Ignition would not turn...
So...This is my first ever post here on FSJN (go easy).
First, I just want to say that I live in Durango, CO and it's killing me that my 2150 2bbl is...
Last post
The 4350 is kind of a love hate thing. The tiny primaries make for great low speed throttle response. However, the secondaries are gigantic. So you...
So I recently replaced the valve covers and gaskets in my jeep they look great, i will post pics later. While finishing up i noticed that my oil...
Last post
I got it, some light tapping g and now it's out the bull tear is in. It's only in two inches couldn't get it to the flange... but it works. Now with...
I'm running a 258 in a J10 with a brand new water pump, thermostat and radiator. Driving around town the truck stays below 200, even if I plug along...
I have a 74 wag. When I turn on my headlights (to running lights or to headlights) my left turn signal doesnt work. The front amber lights dont turn...
Last post
I swapped the front turn bulbs and that seemed to fix the problem for now. Thank you for your help
My closed knuckle axle on my 72 j2000 is leaking pretty badly around the knuckle area. I know in an open knuckle, a bad oil seal will show around the...
Last post
Thanks!!! Wow, that's way inexpensive. I may do that next month.
I'm fairly familiar with carb rebuilds but I've never had a 2150 apart. Is there anything special I should be aware of? Any special tools out side...
Last post
Since I already have the 2150 on it, im going to keep it. I have new riser and gaskets, ordered rebuild kit ( I think I popped the power valve with a...
Is it possible to static time a 360 v8 with TFI / MSD 6AL ignition? By static I mean stopped, not running. I know you can time this way with a point...
Last post
I know I've done it with a multimeter but never with a test light.
The thing is, I can't remember if I was watching voltage or continuity on the...
I ordered the timing chain kit from BJs. I can't keep time on my Cherokee.
The service manual talks about an alignment tool when replacing the...
Last post
A dial indicator into the number 1 spark plug hole to find true TDC was the rule back in the day. Once that was found the crank and cam gear pointers...
Saw a Challenger yesterday with turn signals in the headlights, thought it pretty cool. Searched the 'tube and found these, downside is replacements...
Last post
REDONE, headlights were checked for TX safety inspections years ago, probably a good move to skip the check now. The robots can't scrape the old...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum