Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Well, I've been putzing with the '73 J4000, trying to at least get it mobil so I can move it around, and here's my problem:
It starts right up, Idles...
Last post
They never come back for a success or fail report that would help others.
I hate starting new threads for such random and simple questions but here comes another one..
I got the new gas tank straps in the mail today so I'm...
Last post
I've got the rear brake line (that runs along the frame) sitting in my carport, you can have it if you want.
Thanks CK.
Surprisingly the fuel lines...
Finally my standard size rod bearing is coming friday, only took teamgrandwagoneer 2 weeks to mail it out. So everything is ready to drop the oil pan...
Last post
Well little uodate the leak is slowing down. I drove around today stopped looked under for a few minutes and only 2 or 3 drops fell after like 15...
Will adding a 2 inch body lift to my 1988 jeep wagoneer create a big gap in the bumper and body?
Last post
I like body lifts and have been running them on my two FSJ trucks for years--cheap lift and it doesnt stiffin an already stiff ride. I also ran them...
So today I ordered a new bypass hose because it seems the old one is leaking. Ok. It's like 8$ from BJs. By being a cheap ass I'm left with the...
Last post
Yea ive noticed that... my zjs taillights the bulbs are original lol if they go bad i can take the bulb out clean the contacts and they work again.....
Hey guys. New to the forum. Just picked up an 88 Grand Wagoneer and am sorting all the varied issues...
Right now the tail lights stay on when the...
Last post
You can also put your foot under thr brake pedal and lift it up or your hand and push and force it up hard. My 98 5.9 zj had this issue keeping brake...
Replacing a missing headliner and there seems to be only 1 Bow in the track. I'm guessing there should be two? Would anyone know possible source and...
Last post
There is only 1 bow -external- visible from the inside on the 74 and latter. May be in 73 as well... it is between the backseat and the cargo area...
Good morning all,
I have been searching these forums and testing my instrument cluster to find out why my fuel, temp, and oil gauges do not work. The...
Last post
IMG_1613.JPG So here is why my fuel gauge was not working. I dropped the tank which is stock metal version of this one ( Then to get the fuel sender...
Is this the stock ignition lock cylinder? The one I see on BJs and other sites looks different - it looks like the GM and XJ cherokee columns....
Last post
The new one is a different style. The old non tilt columns use an Amc key R4-A. When jeep went to tilt columns they used a GM column and switch which...
Okay so getting some done on my 76 chief recently. Pulling the carpet out I noticed the tunnel back towards the back seat is pretty bad with rust.....
Last post
Alright sounds good I'm going to look at it up close and in person tomorrow and I'll go from there.. I actually have someone coming to look at buying...
My Cargo area window is leaking pretty bad, between the outside seal and the body at the bottom, What it the best thing to use to seal this up tight?...
Last post
As said above, the least invasive approach is probably your best bet, unscrew the inner trim panel, the gasket will not pop out, so you can observe...
Has anyone ever seen their trans spitting fluid out the dipstick tube? Mine just started doing it after putting on a set of 33's (went from 31's) its...
Last post
Thanks guys, I'm excited to be nearing the point of getting it back on the road!
I recently rebuilt the A4LD on my Explorer and the 400 looks to...
Im getting pretty competent with my electrical skills working on the wagon, ive done a ton of electrical, just finished adding a auto dimming mirror...
Last post
Is it as simple as getting an AMP, running power and ground to it and a fuse of course. Then running the rear right/ left right, and front speakers...
So im prepping everything i need for when i drop my oil pan. I got a new clean pan vs my rusted one and im going to strip it repaint it and clean...
Last post
If you have a knock that bad bearings won't fix it . it might buy you some time, make it better for a while. bearings don't get that bad without rod...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
