Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I ordered the timing chain kit from BJs. I can't keep time on my Cherokee.
The service manual talks about an alignment tool when replacing the...
Last post
A dial indicator into the number 1 spark plug hole to find true TDC was the rule back in the day. Once that was found the crank and cam gear pointers...
Saw a Challenger yesterday with turn signals in the headlights, thought it pretty cool. Searched the 'tube and found these, downside is replacements...
Last post
REDONE, headlights were checked for TX safety inspections years ago, probably a good move to skip the check now. The robots can't scrape the old...
Couple of weeks ago while at the sand dunes, I jumped the heck out of the Honcho, landed hard and the ram hit the oil pan, causing a hole in the pan...
Last post
Replaced the pump and now it steers much better.
I'm leaving the ram off for the Ouray trip just to see...
Looking to see how to install these on the truck, pic would be great. Eyeballing it (yep I bought them) the factory bracket needs to add a tab or use...
Looks like the York on my rig was converted to R134 in the past and subsequently leaked. I've acquired a york to sanden conversion bracket and sanden...
Last post
I did a york to sanden conversion. I tried to fit my old belt but it didn't fit. So I went to the store and asked for a similar belt but just one...
Been getting the Cherokee ready for Ouray and am changing out all the u joints. I have never dealt with a CV joint. Is there anything to know before...
Hey all,
Would anyone be able to recommend the correct product to use when setting your door window glass into the rigid steel channel at the bottom...
Last post
Our glass/ door mechanic at the dealership would loosen the tracks/ guides lube the channels and run the window up and down to adjust and set...
Someone sent me a template for a push bar similar to type below, I can see from the photo it mounts to the bumper bolt but I don't see exactly how it...
I am having over heating problems and cannot figure it out. I just finished my CJ8 (yes I know it is not an FSJ) with an AMC 401. I have flushed the...
Last post
I also have AC, finally, again. I did put a small pusher fan in front of the condenser for those stop light moments, but the mechanical also pulls a...
I have a 5x8 light duty utility trailer that I have used for the past 9 years, painted it once, added 2x8 decking on top of the expanded metal about...
Last post
I grabbed the Optronics, no time to work on it right now, maybe next weekend.
I am looking for some help trouble shooting my heater/defroster. It does not blow air.
I have pulled the fan and it is working., so Fan blows but no...
Last post
Yes it has been a while since I have used the 4 wheel drive. Thanks Ethan
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum